3005K • UltraWiz® UltraOne Adjustable Cable Cold Knife

Replacement pull handle for UltraWiz® UltraOne Cold Knife (3005K).

The coating protects paint from damage while cutting out glass with exposed pinchwelds. Made in the USA.

UltraWiz® has developed these blades, which have a smooth plastic coating on the back, so if the blade touches the paint, it will not be damaged. The coating is very tough and will not easily rub off. The blade is based on the UltraWiz® UltraThin blade, so it is one of the thinnest blades in the industry.

Made with UltraWiz®’s dual-angle sharpening method. PN1002 has a 1" long cutting area. This is the most popular blade because on most vehicles it will cut the urethane with one cut. Original Thickness. Package of ten. Made in the USA.

Made with UltraWiz®’s dual-angle sharpening method. PN5002 is a 1" UltraThin cold knife blade and the most common size used by technicians. If you are a person who always takes cold knife blades out of the box and sharpens them, then the UltraThin series is for you. They are 40% thinner than the regular UltraWiz® blades. Made in the USA.

The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations, creates a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading-edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.

These innovative blades have the longest-lasting edge available today. Specialized grinding and heat-treating techniques are applied to the production of these high-quality blades to ensure that they maintain a tough edge without becoming brittle. Their design was taken from the original UltraWiz® blades. Made in the USA.

UltraWiz® has developed these blades, which have a smooth plastic coating on the back, so if the blade touches the paint, it will not be damaged. The coating is very tough and will not easily rub off. The blade is based on the UltraWiz® UltraThin blade, so it is one of the thinnest blades in the industry.

The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations, creates a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading-edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.

These innovative blades have the longest-lasting edge available today. Specialized grinding and heat-treating techniques are applied to the production of these high-quality blades to ensure that they maintain a tough edge without becoming brittle. Their design was taken from the original UltraWiz® blades. Made in the USA.

You have been asking for them for years! The new 1-1/4" UltraWiz® blades come in original thickness. PN1003 original thickness blades are designed with an extra space between the blade and the pull handle bolt. This extra space gives you greater clearance when the glass has a bonded molding. Original Thickness. Package of ten. Made in the USA.

Made with UltraWiz®’s dual-angle sharpening method. PN5001 is a 1 1/4" UltraThin cold knife blade. If you are a person who always takes cold knife blades out of the box and sharpens them, then the UltraThin series is for you. Designed with an extra space between the blade and the pull handle bolt. This extra space gives you greater clearance when the glass has a bonded molding. They are 40% thinner than the regular UltraWiz® blades. Made in the USA.

The coating protects paint from damage while cutting out glass with exposed pinchwelds. Made in the USA.

UltraWiz® has developed these blades, which have a smooth plastic coating on the back, so if the blade touches the paint, it will not be damaged. The coating is very tough and will not easily rub off. The blade is based on the UltraWiz® UltraThin blade, so it is one of the thinnest blades in the industry.

Made with UltraWiz®’s dual-angle sharpening method. PN1000 is intended for use as a starter blade. TPN1001 has a cutting area that is 3/4" long. It is commonly used to cut standard-width urethane. Many technicians use this blade to make the first cut when cutting wide urethane. Original Thickness. Package of ten. Made in the USA.

Made with UltraWiz®’s dual-angle sharpening method. PN5001 is a 3/4" UltraThin cold knife blade. If you are a person who always takes cold knife blades out of the box and sharpens them, then the UltraThin series is for you. They are 40% thinner than the regular UltraWiz® blades. Made in the USA.

The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations, creates a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading-edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.

These innovative blades have the longest-lasting edge available today. Specialized grinding and heat-treating techniques are applied to the production of these high-quality blades to ensure that they maintain a tough edge without becoming brittle. Their design was taken from the original UltraWiz® blades. Made in the USA.

Made with UltraWiz®’s dual-angle sharpening method. PN1000 is intended for use as a starter blade. The cutting area is 3/8" long and is useful when starting your first cut on urethane that is wider than a regular blade. Original Thickness. Package of ten. Made in the USA.

UltraWiz® Cold Knife is shaped for comfort and gripping power. The handle is oblong so it will not easily spin in your hand. The pull handle is built into the body and not bolted to the blade.

The unique shape allows for the removal of glass without removing the moulding. PN1022 cuts under the molding around the back edge of the glass and underneath the glass. Its unique shape allows you to remove the glass without removing the molding. After the glass is removed there is very little pressure holding the molding into the urethane and it is easy to remove without damage. Original Thickness. Made in the USA.

Pull handle for PN3001K, 3007K, BNQ271, and BQS257 cold knives.