Close
Menu
Register
Wishlist (0)
Search
Register
Wishlist (0)
You have no items in your shopping cart.
Menu
Search
Shopping cart

6992M • UltraWiz® 1" Radius Serrated Blade (Pkg of 5)

Technology Partners: UltraWiz® , UltraWiz®
SKU: 6992M
Be the first to review this product
$31.00
The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations, creates a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading-edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.
+ -
Write your own review Close Review Form
  • Only registered users can write reviews
*
*
Bad
Excellent
    Product tags
    Customers who bought this item also bought
    Picture of SSW508 • Squire™ Wire 72'

    SSW508 • Squire™ Wire 72'

    SSW508
    Square-shaped wire with a sharp edge to cut the toughest urethane.
    $13.00
    Picture of RC100 • RipCord™ HD 100'

    RC100 • RipCord™ HD 100'

    RC100
    Reusable cord designed for thicker urethane and breaking clips during removal.
    $36.00
    Picture of RB497 • Razor Blades (Box of 100)

    RB497 • Razor Blades (Box of 100)

    RB497
    $9.00
    Picture of IS742 • Installation Sticks

    IS742 • Installation Sticks

    IS742
    The most used tool by Auto Glass Technicians. Can be used to manipulate the urethane, remove door panels, install rubber gaskets, remove mouldings, lift the cowling, and tuck in headliners. Use the rounded tip for all the things you now use a regular installation stick for, and then turn it around and use the chisel-end to scrape excess urethane buildup out of corners where a pinchweld scraper or blade will damage the paint. They are great for removing excess wet urethane. Made in the USA.
    $2.00
    Related products
    Picture of 52C2 • UltraWiz® UltraThin 1" Coated Reverse Bend Blade (Pkg of 5)

    52C2 • UltraWiz® UltraThin 1" Coated Reverse Bend Blade (Pkg of 5)

    52C2
    The coating protects paint from damage while cutting out glass with exposed pinchwelds. Made in the USA.
    $37.00
    Picture of 51C2 • UltraWiz® UltraThin 1" Coated Paint Protection Blade (Pkg of 10)

    51C2 • UltraWiz® UltraThin 1" Coated Paint Protection Blade (Pkg of 10)

    51C2
    UltraWiz® has developed these blades, which have a smooth plastic coating on the back, so if the blade touches the paint, it will not be damaged. The coating is very tough and will not easily rub off. The blade is based on the UltraWiz® UltraThin blade, so it is one of the thinnest blades in the industry.
    $71.00
    Picture of PN1002 • UltraWiz® 1" Cold Knife Blades (Pkg of 10)

    PN1002 • UltraWiz® 1" Cold Knife Blades (Pkg of 10)

    PN1002
    Made with UltraWiz®’s dual-angle sharpening method. PN1002 has a 1" long cutting area. This is the most popular blade because on most vehicles it will cut the urethane with one cut. Original Thickness. Package of ten. Made in the USA.
    $33.00
    Picture of PN5002 • UltraWiz® 1" Cold Knife UltraThin Blades (Pkg of 10)

    PN5002 • UltraWiz® 1" Cold Knife UltraThin Blades (Pkg of 10)

    PN5002
    Made with UltraWiz®’s dual-angle sharpening method. PN5002 is a 1" UltraThin cold knife blade and the most common size used by technicians. If you are a person who always takes cold knife blades out of the box and sharpens them, then the UltraThin series is for you. They are 40% thinner than the regular UltraWiz® blades. Made in the USA.
    $44.00
    Picture of 7002M • UltraWiz® 1" UltraThin Stainless Steel Cold Knife Blades (Pkg of 10)

    7002M • UltraWiz® 1" UltraThin Stainless Steel Cold Knife Blades (Pkg of 10)

    7002M
    These innovative blades have the longest-lasting edge available today. Specialized grinding and heat-treating techniques are applied to the production of these high-quality blades to ensure that they maintain a tough edge without becoming brittle. Their design was taken from the original UltraWiz® blades. Made in the USA.
    $60.00
    Picture of 51C4 • UltraWiz® UltraThin 1-1/2" Coated Paint Protection Blade (Pkg of 10)

    51C4 • UltraWiz® UltraThin 1-1/2" Coated Paint Protection Blade (Pkg of 10)

    51C4
    UltraWiz® has developed these blades, which have a smooth plastic coating on the back, so if the blade touches the paint, it will not be damaged. The coating is very tough and will not easily rub off. The blade is based on the UltraWiz® UltraThin blade, so it is one of the thinnest blades in the industry.
    $86.00
    Picture of 6994M • UltraWiz® 1-1/2" Radius Serrated Blade (Pkg of 5)

    6994M • UltraWiz® 1-1/2" Radius Serrated Blade (Pkg of 5)

    6994M
    The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations, creates a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading-edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.
    $36.00
    Picture of 7004M • UltraWiz® 1-1/2" UltraThin Stainless Steel Cold Knife Blades (Pkg of 10)

    7004M • UltraWiz® 1-1/2" UltraThin Stainless Steel Cold Knife Blades (Pkg of 10)

    7004M
    These innovative blades have the longest-lasting edge available today. Specialized grinding and heat-treating techniques are applied to the production of these high-quality blades to ensure that they maintain a tough edge without becoming brittle. Their design was taken from the original UltraWiz® blades. Made in the USA.
    $88.00
    Picture of PN1003 • UltraWiz® 1-1/4" Cold Knife Blades (Pkg of 10)

    PN1003 • UltraWiz® 1-1/4" Cold Knife Blades (Pkg of 10)

    PN1003
    You have been asking for them for years! The new 1-1/4" UltraWiz® blades come in original thickness. PN1003 original thickness blades are designed with an extra space between the blade and the pull handle bolt. This extra space gives you greater clearance when the glass has a bonded molding. Original Thickness. Package of ten. Made in the USA.
    $47.00
    Picture of PN5003 • UltraWiz® 1-1/4" Cold Knife UltraThin Blades (Pkg of 10)

    PN5003 • UltraWiz® 1-1/4" Cold Knife UltraThin Blades (Pkg of 10)

    PN5003
    Made with UltraWiz®’s dual-angle sharpening method. PN5001 is a 1 1/4" UltraThin cold knife blade. If you are a person who always takes cold knife blades out of the box and sharpens them, then the UltraThin series is for you. Designed with an extra space between the blade and the pull handle bolt. This extra space gives you greater clearance when the glass has a bonded molding. They are 40% thinner than the regular UltraWiz® blades. Made in the USA.
    $56.00
    Picture of 52C1 • UltraWiz® UltraThin 3/4" Coated Reverse Bend Blade (Pkg of 5)

    52C1 • UltraWiz® UltraThin 3/4" Coated Reverse Bend Blade (Pkg of 5)

    52C1
    The coating protects paint from damage while cutting out glass with exposed pinchwelds. Made in the USA.
    $37.00
    Picture of 51C1 • UltraWiz® UltraThin 3/4" Coated Paint Protection Blade (Pkg of 10)

    51C1 • UltraWiz® UltraThin 3/4" Coated Paint Protection Blade (Pkg of 10)

    51C1
    UltraWiz® has developed these blades, which have a smooth plastic coating on the back, so if the blade touches the paint, it will not be damaged. The coating is very tough and will not easily rub off. The blade is based on the UltraWiz® UltraThin blade, so it is one of the thinnest blades in the industry.
    $71.00
    Picture of PN1001 • UltraWiz® 3/4" Cold Knife Blades (Pkg of 10)

    PN1001 • UltraWiz® 3/4" Cold Knife Blades (Pkg of 10)

    PN1001
    Made with UltraWiz®’s dual-angle sharpening method. PN1000 is intended for use as a starter blade. TPN1001 has a cutting area that is 3/4" long. It is commonly used to cut standard-width urethane. Many technicians use this blade to make the first cut when cutting wide urethane. Original Thickness. Package of ten. Made in the USA.
    $33.00
    Picture of PN5001 • UltraWiz® 3/4" Cold Knife UltraThin Blades (Pkg of 10)

    PN5001 • UltraWiz® 3/4" Cold Knife UltraThin Blades (Pkg of 10)

    PN5001
    Made with UltraWiz®’s dual-angle sharpening method. PN5001 is a 3/4" UltraThin cold knife blade. If you are a person who always takes cold knife blades out of the box and sharpens them, then the UltraThin series is for you. They are 40% thinner than the regular UltraWiz® blades. Made in the USA.
    $44.00
    Picture of 6991M • UltraWiz® 3/4" Radius Serrated Blade (Pkg of 5)

    6991M • UltraWiz® 3/4" Radius Serrated Blade (Pkg of 5)

    6991M
    The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations, creates a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading-edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.
    $31.00
    Picture of 7001M • UltraWiz® 3/4" UltraThin Stainless Steel Cold Knife Blades (Pkg of 10)

    7001M • UltraWiz® 3/4" UltraThin Stainless Steel Cold Knife Blades (Pkg of 10)

    7001M
    These innovative blades have the longest-lasting edge available today. Specialized grinding and heat-treating techniques are applied to the production of these high-quality blades to ensure that they maintain a tough edge without becoming brittle. Their design was taken from the original UltraWiz® blades. Made in the USA.
    $60.00
    Picture of PN1000 • UltraWiz® 3/8" Cold Knife Blades (Pkg of 10)

    PN1000 • UltraWiz® 3/8" Cold Knife Blades (Pkg of 10)

    PN1000
    Made with UltraWiz®’s dual-angle sharpening method. PN1000 is intended for use as a starter blade. The cutting area is 3/8" long and is useful when starting your first cut on urethane that is wider than a regular blade. Original Thickness. Package of ten. Made in the USA.
    $33.00
    Picture of PN3001K • UltraWiz® Cold Knife

    PN3001K • UltraWiz® Cold Knife

    PN3001K
    UltraWiz® Cold Knife is shaped for comfort and gripping power. The handle is oblong so it will not easily spin in your hand. The pull handle is built into the body and not bolted to the blade.
    $31.00
    Picture of PN1022 • UltraWiz® Moulding Saver Blade (Pkg of 5)

    PN1022 • UltraWiz® Moulding Saver Blade (Pkg of 5)

    PN1022
    The unique shape allows for the removal of glass without removing the moulding. PN1022 cuts under the molding around the back edge of the glass and underneath the glass. Its unique shape allows you to remove the glass without removing the molding. After the glass is removed there is very little pressure holding the molding into the urethane and it is easy to remove without damage. Original Thickness. Made in the USA.
    $27.00
    Picture of PN3010RK • UltraWiz® Pull Handle

    PN3010RK • UltraWiz® Pull Handle

    PN3010RK
    Pull handle for PN3001K, 3007K, BNQ271, and BQS257 cold knives.
    $16.00
    Picture of 3005K • UltraWiz® UltraOne Adjustable Cable Cold Knife

    3005K • UltraWiz® UltraOne Adjustable Cable Cold Knife

    3005K
    A one-set-screw system that allows quick-changes and a fully adjustable blade.
    $32.00
    Picture of 3005RC • UltraWiz® UltraOne Cold Knife Pull Handle

    3005RC • UltraWiz® UltraOne Cold Knife Pull Handle

    3005RC
    Replacement pull handle for UltraWiz® UltraOne Cold Knife (3005K).
    $15.00
    Contact Info
    • 2611 Oakmont Drive • Round Rock, Texas • 78665
    • sales@equalizer.com
    • Toll Free USA & Canada: 800.334.1334
    • International: 512.388.7715
    Information
    Newsletter
    Copyright © 2024 Equalizer. All rights reserved.