Channel Cleaning Bits-1/8"
Replacing most door glasses is straightforward and not extremely difficult, but door glasses that have the bottom channel put on with an adhesive can be difficult. Sometimes, you can spend more time cleaning the glass out of the channel than you spend doing all the rest of the job. We see people heat the channel so the adhesive will release from it, and usually smoke is going everywhere. We do not know if this is dangerous, but we have often wondered what is in the gases given off by the heated adhesive. We have solved the problem of removing the glass and adhesive. Put one of these in your drill and cut the glass and adhesive out of a door glass channel in seconds, no heat. Each bit has six, hardened, steel flutes that cut the adhesive and broken glass out of the channel. They come in two sizes: 1/4" for thicker glass channels and 1/8" for the narrower channels.
Customers who bought this item also bought
Quick-blade change design...
This Window & Door Clip Remover works on GM, Ford and other common c-clips. The flared sides prevent the metal from damaging the door panel. The unique back-end holds the clip firmly. Brand new with engraving errors.
EasyPunch™ is designed to remove rivet stems with the hammering device built into the EasyPunch™, which is delivered with a simple push on the handle. Eliminates the need for hammering. Not for use on steel rivets. Minor cosmetic damage.
Our BT590 will reach a full 4 inches under the panel to remove the deepest clips. The other end is 2 inches deep so you can turn it around to remove normal clips. Minor cosmetic damage.