Products

Invented By: Duane Roser
Tab Retractor Tool that features tapered, thin edges to easily slide between the door and panel to remove clips without damage. Designed with two grooves to access the clips from different angles.

This tool has a small rubber spacer at each end to keep the tool above the glass by about 1/32" preventing the tool from scratching the glass. It also holds the tool end above the glass, lessening the chance of the tip catching the edge of the glass and breaking it. Made of steel.

This tool is thin enough to fit under moldings and wide enough so as not to tear them.

Designed to remove and save belt mouldings that are installed with clips.

Our rivet removal drill bit is made of super-hardened steel and has four sharp cutting flutes that will quickly and easily remove the rivet head.

Rivet Stem Remover has a contoured end so it will sit over the rivet and align itself perfectly with the rivet stem. With several light taps of a hammer, the rivet stem is driven out.

EasyPunch™ is designed to remove rivet stems with the hammering device built into the EasyPunch™, which is delivered with a simple push on the handle. Eliminates the need for hammering. Not for use on steel rivets.

This tool is perfect for removing broken tempered glass. Designed with deep notches and smaller teeth that will capture broken glass and pull it out. It is made of flexible stainless steel with a Neoprene handle and measures 22" long.

This tool will flex to fit the contour of the door and has two prongs to grab the glass and pull it to an area where it can be removed. The tool is made of spring steel with a plastic handle and measures 19" long.

Equalizer® Transformer® is a drill powered auto glass removal tool that works with your existing Visual Vacuum Cup! The Transformer® is a multi-use tool that serves as a dual-cutting, cord removal tool as well as two quarter glass removal tools that attach to the door striker when separated.

TFM1000 TRANSFORMER® TOOL ONLY INCLUDES:

1 • TFM1000 • Transformer®	1 • PRM338 • 3/8" Ratchet
1 • 2688 • Screws/Studs (4)	1 • TSD192 • Drill Bit
1 • SDS192 • SideStriker'"	1 • SDS-FP • Protection Pad

The Equalizer® Viper™ is a cord and wire removal device designed for small quarter glass removals, but can also be used on windshields and back glasses. The double direction capability of the reel allows for optimum use and the magnetic points on the ratchet shaft ensure that your ratchet stays firmly attached to the tool, even in steep and vertical scenarios. Invented by: Eric Asbery & Gilbert Gutierrez

VIP1138 VIPER™ KIT INCLUDES:

1 • VT1136 • Viper™ Tool	1 • RR23 • 1/2" Drive Ratchet
1 • VS1127 • 1-1/8" Socket	1 • FG1129 • Pistol Grip Centerstart™
1 • MAC1135 • Mini Anchor	1 • WDD167 • Venom™ Wire Dispensing Unit
1 • STL166 • 164' Roll of Squire2™ Wire	1 • RC100 • 100' Roll of RipCord™HD
1 • BNP516 • Wire Grabber Pliers & Cutter	1 • UPC335 • Package of Guide Pins
1 • HP564 • Clear Headliner Protector	1 • CU1077 • Clear Dash Protector

All packaged in a soft case with a foam liner.

The Equalizer® Viper™ is a cord and wire removal device designed for small quarter glass removals, but can also be used on windshields and back glasses. The double direction capability of the reel allows for optimum use and the magnetic points on the ratchet shaft ensure that your ratchet stays firmly attached to the tool, even in steep and vertical scenarios. Invented by: Eric Asbery & Gilbert Gutierrez

• VT1136 VIPER™ TOOL ONLY INCLUDES:
• 1 • VT1136 • Viper™ Tool
• 1 • RR23 • 1/2" Drive Ratchet
• 1 • VS1127 • 1-1/8" Socket

Equalizer® Python™ is a rotating cord and wire removal system which uses a unique, directional suspension reel that allows for safe and effective glass removal. With just the rotation of the curved stainless steel slide bar, the cord and wire will cut through the toughest urethane with no resistance.

PWT1113 PYTHON™ WIRE REMOVAL SYSTEM INCLUDES:

1 • PCA1121 • Python™ Cup Assembly	1 • CCA1123 • Slither™
1 • WDD167 • Venom™ Wire Dispenser	1 • JN1130 • T-Handle Centerstart™
1 • IS742 • Installation Stick	1 • CU1077 • Clear Dash Protector
1 • BNP516 • Wire Grabber Pliers & Cutter	1 • UPC335 • Package of Guide Pins
4 • STL166 • Rolls of Squire2™ Wire

All packaged in a heavy-duty plastic, foam lined case.

Equalizer® Python™ is a rotating cord and wire removal system which uses a unique, directional suspension reel that allows for safe and effective glass removal. With just the rotation of the curved stainless steel slide bar, the cord and wire will cut through the toughest urethane with no resistance.

PCA1121 PYTHON™ CUP ASSEMBLY INCLUDES:

1 • PCA1121 • Python™ Cup Assembly

Slither™ is an orbital suction cup device that can be moved around the windshield so that cutting can be done without moving the Python. The wheel rotates as the wire is being pulled. This makes the Slither™ an easy moving part that has no resistance.