UltraWiz

sort by:
  • 1
  • 2
view:

UltraWiz® Pull Handle

IP PN3010RK

$11.00

Pull handle for PN3001K, 3007K, BNQ271, and BQS257 cold knives.

UltraWiz® Moulding Saver Blade • 5

IP PN1022

$23.00

PN1022 cuts under the molding around the back edge of the glass and underneath the glass. Its unique shape allows you to remove the glass without removing the molding. After the glass is removed there is very little pressure holding the molding into the urethane and it is easy to remove without damage.

Original Thickness.

UltraWiz® UltraOne Adjustable Cable Cold Knife

IP 3005K

$23.00

Auto Glass Technicians know that UltraWiz® has a reputation for quality cold knives and some of the strongest, sharpest and thinnest cold knife blades in the industry. This cold knife combines all you have come to expect from UltraWiz®, plus a one-set-screw system that allows quick-changes and a fully adjustable blade. A unique, durable foam cover offers comfort for the technician and scratch resistance for vehicle protection.

Comes with one 1" blade.

UltraWiz® 1" Radius Serrated Blade

IP 6992M

$25.00

• New radius grind offers the easiest pulling resistance available

• Only the unique serration points touch the glass keeping the rest of the edge sharp 

• The thinnest UltraWiz® blade ever produced 

• Distinctive center rib adds extra strength at the bend 

 

The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations create a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.

UltraWiz® Cold Knife

IP PN3001K

$26.00

UltraWiz® Cold Knife is shaped for comfort and gripping power. The handle is oblong so it will not easily spin in your hand. The pull handle is built into the body and not bolted to the blade. The PN3001K is designed for a quick blade change; simply loosen one screw and change the blade in seconds. It has a high strength Derlin® handle to resist scratching the finish of the vehicle. This is important because some of the new vehicles have seven different layers of paint and are impossible to touch up. Comes with one blade.

Made in the USA.

UltraWiz® 3/4" Radius Serrated Blade

IP 6991M

$26.00

• New radius grind offers the easiest pulling resistance available

• Only the unique serration points touch the glass keeping the rest of the edge sharp 

• The thinnest UltraWiz® blade ever produced 

• Distinctive center rib adds extra strength at the bend 

 

The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations create a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.

1" UltraWiz® Cold Knife Blades • 10

IP PN1002

$28.00

PN1002 has a 1" long cutting area. This is the most popular blade because on most vehicles it will cut the urethane with one cut.

Original Thickness.

Package of ten.

 

3/4" UltraWiz® Cold Knife Blades • 10

IP PN1001

$28.00

PN1001 has a cutting area that is 3/4" long. It is commonly used to cut standard-width urethane. Many technicians use this blade to make the first cut when cutting wide urethane. 

Original Thickness.

Package of ten.

3/8" UltraWiz® Cold Knife Blades • 10

IP PN1000

$28.00

PN1000 is intended for use as a starter blade. The cutting area is 3/8" long and is useful when starting your first cut on urethane that is wider than a regular blade.

Original Thickness.

Package of ten.

 

UltraWiz® 1-1/2" Radius Serrated Blade

IP 6994M

$31.00

• New radius grind offers the easiest pulling resistance available

• Only the unique serration points touch the glass keeping the rest of the edge sharp 

• The thinnest UltraWiz® blade ever produced 

• Distinctive center rib adds extra strength at the bend 

 

The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations create a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.

UltraWiz® 3/4" Coated Reverse Bend Standard Paint Protection Blade • 5

IP 52C1

$31.00

The innovative Reverse Bend Blade design is an UltraThin blade bent in the reverse direction of a regular cold knife blade with the added paint protection coating. This allows the technician to cut down and away from the glass, rather than up towards the glass. The reverse bend cuts without digging into or damaging encapsulated glass or underside molding. The shank’s cutting edge has been modified to prevent scratches to the pinchweld or from cutting into the perimeters of parts with applied moldings on the edge of the glass.

UltraWiz® 1" Coated Reverse Bend Long Paint Protection Blade • 5

IP 52C2

$31.00

The innovative Reverse Bend Blade design is an UltraThin blade bent in the reverse direction of a regular cold knife blade with the added paint protection coating. This allows the technician to cut down and away from the glass, rather than up towards the glass. The reverse bend cuts without digging into or damaging encapsulated glass or underside molding. The shank’s cutting edge has been modified to prevent scratches to the pinchweld or from cutting into the perimeters of parts with applied moldings on the edge of the glass.

Package of five.

1" UltraWiz® Cold Knife UltraThin Blades • 10

IP PN5002

$37.00

PN5002 is a 1" UltraThin cold knife blade and the most common size used by technicians.

If you are a person who always takes cold knife blades out of the box and sharpens them, then the UltraThin series is for you.

They are 40% thinner than the regular UltraWiz® blades.

Package of ten.

 

 

3/4" UltraWiz® Cold Knife UltraThin Blades • 10

IP PN5001

$37.00

PN5001 is a 3/4" UltraThin cold knife blade.

If you are a person who always takes cold knife blades out of the box and sharpens them, then the UltraThin series is for you.

They are 40% thinner than the regular UltraWiz® blades.

 

UltraWiz® 1-1/2" Coated Reverse Bend XL Paint Protection Blades • 5

IP 52C4

$39.00

The innovative Reverse Bend Blade design is an UltraThin blade bent in the reverse direction of a regular cold knife blade with the added paint protection coating. This allows the technician to cut down and away from the glass, rather than up towards the glass. The reverse bend cuts without digging into or damaging encapsulated glass or underside molding. The shank’s cutting edge has been modified to prevent scratches to the pinchweld or from cutting into the perimeters of parts with applied moldings on the edge of the glass.

Package of five.

  • 1
  • 2