UltraWiz

sort by:
  • 1
view:

1-1/2" UltraWiz® Cold Knife Blades • 10

IP PN1004

$40.00

PN1004 has a cutting area that is 1-1/2" long. We do not recommend using this blade for initial cuts. Use a shorter blade to make your first cut, then go back with this blade to make your final cut. Especially useful where urethane is very wide, such as corners and along the bottom.

Original Thickness.

Package of ten.

1-1/2" UltraWiz® Cold Knife UltraThin Blades • 10

IP PN5004

$50.00

PN5004 is a 1-1/2" blade and should never be used for the first cut. Always use a shorter blade to make the first cut then finish cutting through the urethane with this long blade.

Package of ten.

1" UltraWiz® Cold Knife Blades • 10

IP PN1002

$28.00

PN1002 has a 1" long cutting area. This is the most popular blade because on most vehicles it will cut the urethane with one cut.

Original Thickness.

Package of ten.

 

1" UltraWiz® Cold Knife UltraThin Blades • 10

IP PN5002

$37.00

PN5002 is a 1" UltraThin cold knife blade and the most common size used by technicians.

If you are a person who always takes cold knife blades out of the box and sharpens them, then the UltraThin series is for you.

They are 40% thinner than the regular UltraWiz® blades.

Package of ten.

 

 

1" UltraWiz® UltraThin Stainless Steel Cold Knife Blades • 10

IP 7002M

$48.00

These innovative blades have the longest lasting edge available today. Specialized grinding and heat-treating techniques are applied to the production of these high-quality blades to ensure that they maintain a tough edge without becoming brittle. Their design was taken from the original UltraWiz® blades.

Made in the USA.

1-1/2" Ultra Wiz® UltraThin Stainless Steel Cold Knife Blades • 10

IP 7004M

$71.00

These innovative blades have the longest lasting edge available today. Specialized grinding and heat-treating techniques are applied to the production of these high-quality blades to ensure that they maintain a tough edge without becoming brittle. Their design was taken from the original UltraWiz® blades.

Made in the USA.

Package of ten.

1-1/4" UltraWiz® Cold Knife Blades • 10

IP PN1003

$40.00

You have been asking for them for years! The new 1-1/4" UltraWiz® blades come in original thickness. PN1003 original thickness blades are designed with an extra space between the blade and the pull handle bolt. This extra space gives you greater clearance when the glass has a bonded molding.


Original Thickness.

Package of ten.

 

1-1/4" UltraWiz® Cold Knife UltraThin Blades • 10

IP PN5003

$47.00

PN5001 is a 1 1/4" UltraThin cold knife blade.

If you are a person who always takes cold knife blades out of the box and sharpens them, then the UltraThin series is for you. Designed with an extra space between the blade and the pull handle bolt. This extra space gives you greater clearance when the glass has a bonded molding.

They are 40% thinner than the regular UltraWiz® blades.

Package of 10.

 

3/4" UltraWiz® Cold Knife Blades • 10

IP PN1001

$28.00

PN1001 has a cutting area that is 3/4" long. It is commonly used to cut standard-width urethane. Many technicians use this blade to make the first cut when cutting wide urethane. 

Original Thickness.

Package of ten.

3/4" UltraWiz® Cold Knife UltraThin Blades • 10

IP PN5001

$37.00

PN5001 is a 3/4" UltraThin cold knife blade.

If you are a person who always takes cold knife blades out of the box and sharpens them, then the UltraThin series is for you.

They are 40% thinner than the regular UltraWiz® blades.

 

3/8" UltraWiz® Cold Knife Blades • 10

IP PN1000

$28.00

PN1000 is intended for use as a starter blade. The cutting area is 3/8" long and is useful when starting your first cut on urethane that is wider than a regular blade.

Original Thickness.

Package of ten.

 

Quicknife™

IP BNQ271

$69.00

Equalizer® Quicknife™is a fully adjustable cold knife with a unique lever design which creates quick blade changes and fully variable height adjustments without having to release pins or loosen bolts. 

The unique clamping device within the Quicknife™ locks blades without pins or bolts through the knife holes.

Additionally, the pull handle is attached to the body so removing the handle isn't necessary to exchange blades.

Features an oblong aluminum handle, not round, preventing twisting in your hand while cutting or rolling off of a vehicle if placed on the hood.  The pull handle is foam-covered  for increased comfort.

Includes one Z2 Blade.

Made in the USA.

Ultra Wiz® 3/4" UltraThin Stainless Steel Cold Knife Blades • 10

IP 7001M

$48.00

These innovative blades have the longest lasting edge available today. Specialized grinding and heat-treating techniques are applied to the production of these high-quality blades to ensure that they maintain a tough edge without becoming brittle. Their design was taken from the original UltraWiz® blades.

Made in the USA.

Package of ten.

 

UltraWiz® 1" Coated Reverse Bend Long Paint Protection Blade • 5

IP 52C2

$31.00

The innovative Reverse Bend Blade design is an UltraThin blade bent in the reverse direction of a regular cold knife blade with the added paint protection coating. This allows the technician to cut down and away from the glass, rather than up towards the glass. The reverse bend cuts without digging into or damaging encapsulated glass or underside molding. The shank’s cutting edge has been modified to prevent scratches to the pinchweld or from cutting into the perimeters of parts with applied moldings on the edge of the glass.

Package of five.

UltraWiz® 1" Exposed Pinchweld Cold Knife Blades

IP 51C2

$58.00

Manufacturers are always looking for ways to save money when building cars, and what better way to save money than to leave the molding off of the glass. They give no thought to the problems this will create for the glass technician. A small scratch that would not be a problem with a molding to hide now becomes a huge problem with the exposed area because the paint must be matched to the car. With the Exposed Pinchweld Removal Blades, the problems associated with this method of installation are now solved. UltraWiz® has developed these blades, which have a smooth plastic coating on the back, so if the blade touches the paint, it will not be damaged. The coating is very tough and will not easily rub off. The blade is based on the UltraWiz® UltraThin blade, so it is one of the thinnest blades in the industry. All blades will have a small amount of coating on the inside of the shank, but it will be kept as thin as possible to keep from increasing the blade thickness. This is critical due to the limited clearance that is available in many vehicles, especially in the corners. Also, the tip or cutting edge is not coated. Any coating on the cutting edge would reduce its sharpness, increasing the resistance during cutting, and thereby increasing the chance of blade failure.

Package of 10.

UltraWiz® 1" Radius Serrated Blade

IP 6992M

$25.00

• New radius grind offers the easiest pulling resistance available

• Only the unique serration points touch the glass keeping the rest of the edge sharp 

• The thinnest UltraWiz® blade ever produced 

• Distinctive center rib adds extra strength at the bend 

 

The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations create a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.

UltraWiz® 1-1/2" Coated Reverse Bend XL Paint Protection Blades • 5

IP 52C4

$39.00

The innovative Reverse Bend Blade design is an UltraThin blade bent in the reverse direction of a regular cold knife blade with the added paint protection coating. This allows the technician to cut down and away from the glass, rather than up towards the glass. The reverse bend cuts without digging into or damaging encapsulated glass or underside molding. The shank’s cutting edge has been modified to prevent scratches to the pinchweld or from cutting into the perimeters of parts with applied moldings on the edge of the glass.

Package of five.

UltraWiz® 1-1/2" Radius Serrated Blade

IP 6994M

$31.00

• New radius grind offers the easiest pulling resistance available

• Only the unique serration points touch the glass keeping the rest of the edge sharp 

• The thinnest UltraWiz® blade ever produced 

• Distinctive center rib adds extra strength at the bend 

 

The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations create a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.

UltraWiz® 1-1/2" Exposed Pinchweld Cold Knife Blades

IP 51C4

$70.00

Manufacturers are always looking for ways to save money when building cars, and what better way to save money than to leave the molding off of the glass. They give no thought to the problems this will create for the glass technician. A small scratch that would not be a problem with a molding to hide it now becomes a huge problem with the exposed area because the paint must be matched to the car. With the Exposed Pinchweld Removal Blades, the problems associated with this method of installation are now solved. UltraWiz® has developed these blades, which have a smooth plastic coating on the back, so if the blade touches the paint, it will not be damaged. The coating is very tough and will not easily rub off. The blade is based on the UltraWiz® UltraThin blade, so it is one of the thinnest blades in the industry. All blades will have a small amount of coating on the inside of the shank, but it will be kept as thin as possible to keep from increasing the blade thickness. This is critical due to the limited clearance that is available in many vehicles, especially in the corners. Also, the tip or cutting edge is not coated. Any coating on the cutting edge would reduce its sharpness, increasing the resistance during cutting, and thereby increasing the chance of blade failure.

Package of 10.

UltraWiz® 3/4" Coated Reverse Bend Standard Paint Protection Blade • 5

IP 52C1

$31.00

The innovative Reverse Bend Blade design is an UltraThin blade bent in the reverse direction of a regular cold knife blade with the added paint protection coating. This allows the technician to cut down and away from the glass, rather than up towards the glass. The reverse bend cuts without digging into or damaging encapsulated glass or underside molding. The shank’s cutting edge has been modified to prevent scratches to the pinchweld or from cutting into the perimeters of parts with applied moldings on the edge of the glass.

UltraWiz® 3/4" Exposed Pinchweld Cold Knife Blades • 10

IP 51C1

$61.00

Manufacturers are always looking for ways to save money when building cars, and what better way to save money than to leave the molding off of the glass. They give no thought to the problems this will create for the glass technician. A small scratch that would not be a problem with a molding to hide it becomes a huge problem with the exposed area because the paint must be matched to the car. With the Exposed Pinchweld Removal Blades, the problems associated with this method of installation are now solved. UltraWiz® has developed these blades, which have a smooth plastic coating on the back, so if the blade touches the paint, it will not be damaged. The coating is very tough and will not easily rub off. The blade is based on the UltraWiz® UltraThin blade, so it is one of the thinnest blades in the industry. All blades will have a small amount of coating on the inside of the shank, but it will be kept as thin as possible to keep from increasing the blade thickness. This is critical due to the limited clearance that is available in many vehicles, especially in the corners. Also, the tip or cutting edge is not coated. Any coating on the cutting edge would reduce its sharpness, increasing the resistance during cutting, and thereby increasing the chance of blade failure.

Package of 10.•

UltraWiz® 3/4" Radius Serrated Blade

IP 6991M

$26.00

• New radius grind offers the easiest pulling resistance available

• Only the unique serration points touch the glass keeping the rest of the edge sharp 

• The thinnest UltraWiz® blade ever produced 

• Distinctive center rib adds extra strength at the bend 

 

The conical ground shape on the back of the new UltraWiz® Radius Serrated Blade is different from anything ever made before. This design, along with the serrations create a very thin blade with much less cutting resistance than anything in the industry! The radius grind is similar to what techs have been doing for years, but on these blades, it is done before heat treating to produce the highest performance possible. The unique serration design leaves small leading edge points to pierce the urethane for an easier pull during cutting. Also with only the small serration points touching the glass, the majority of the blade stays sharp for continued cutting ease.

UltraWiz® Cold Knife

IP PN3001K

$26.00

UltraWiz® Cold Knife is shaped for comfort and gripping power. The handle is oblong so it will not easily spin in your hand. The pull handle is built into the body and not bolted to the blade. The PN3001K is designed for a quick blade change; simply loosen one screw and change the blade in seconds. It has a high strength Derlin® handle to resist scratching the finish of the vehicle. This is important because some of the new vehicles have seven different layers of paint and are impossible to touch up. Comes with one blade.

Made in the USA.

UltraWiz® Moulding Saver Blade • 5

IP PN1022

$23.00

PN1022 cuts under the molding around the back edge of the glass and underneath the glass. Its unique shape allows you to remove the glass without removing the molding. After the glass is removed there is very little pressure holding the molding into the urethane and it is easy to remove without damage.

Original Thickness.

UltraWiz® Pull Handle

IP PN3010RK

$11.00

Pull handle for PN3001K, 3007K, BNQ271, and BQS257 cold knives.

UltraWiz® UltraOne Adjustable Cable Cold Knife

IP 3005K

$23.00

Auto Glass Technicians know that UltraWiz® has a reputation for quality cold knives and some of the strongest, sharpest and thinnest cold knife blades in the industry. This cold knife combines all you have come to expect from UltraWiz®, plus a one-set-screw system that allows quick-changes and a fully adjustable blade. A unique, durable foam cover offers comfort for the technician and scratch resistance for vehicle protection.

Comes with one 1" blade.

  • 1