Cordless 1/2" Compact Drill Driver Kit The M18™ Cordless 1/2" Compact Drill Driver has been built to withstand tough job site conditions. It has a longer run-time and takes fewer battery changes so that you can maintain momentum while you're working. The balance, weight, and grip of the tool have been optimized to reduce fatigue. Its superior bit grip prevents frequent bit retightening and lost bits while the built-in LED's illuminate your work surface.
Kit Contents: one M18™ Cordless 1/2" Compact Drill Driver, two M18™ Compact Battery Packs, one 30 Minute charger, and one handy plastic carrying case.
The problem with removing rivets from door glasses is the rivet stem. The rivet stem is made of steel and must be removed before you can drill out the aluminum. Our rivet head removal drill bit tackles the problem in another way: it drills the rivet head off and leaves the steel stem in place. When the rivet head is drilled away you can then push the remaining aluminum shank and the rivet stem out and the rivet is released. Our rivet removal drill bit is made of super hardened steel and has four sharp cutting flutes that will quickly and easily remove the rivet head.
If windshields were all you installed you would never need most of these Torx® bits, but as technicians, we must also install quarter glasses. To install quarter glass it is often necessary to remove seats, interior quarter panels, and even seat belts. Most of these are held in place by a Torx® bit. On very large Torx® bits you cannot get the leverage with a small ratchet, so we offer the Super Torx® Bit Set which has the appropriate size ratchet drive for the bit. Sizes included in the set: T-60 with a 1/2” ratchet drive, T-55, T-50, T-47, T-45, T-40 each with a 3/8” ratchet drive, and T-30, T-27, T-25, T-20, T-15, T-10 each with a 1/4” ratchet drive. Each set comes in a molded, soft plastic container that holds each Torx® bit in place.