Mouldings & Clips

sort by:
view:

1" Gold Glass Group 75' Spool

IP T108B

$74.00

In the past, you could spend more time saving the molding than you spent removing and replacing the windshield. There were many reasons for saving a molding, but the most common reason was that it was difficult to stock all the different moldings. Insurance companies realize that you cannot always save the molding when replacing a windshield. For this reason, they now pay for a new molding when the old one cannot be saved. old Glass Group has solved the first problem. You no longer need to stock dozens of different moldings. You can now reduce your inventory with universal moldings. Four moldings equal over four hundred applications. old Glass Group moldings do not shrink or discolor over time, never crimp around corners, always lay flush against the vehicle, never need a heat gun to install, and fit both thick windshields and thin tempered parts. A thin layer of butyl is made into the channel of each molding. When the molding is pushed onto the glass the butyl adheres to the edge of the glass and the molding will not come off. You will not find T110 listed on the chart at right. They are both intended to replace push-in “Christmas Tree” moldings. The great thing about these moldings is there is adhesive under the part that goes against the vehicle. This adhesive sticks to the vehicle and holds the molding in place while the urethane cures. The adhesive assures a perfect bond and the cured urethane holds it permanently in place.

3/4" Gold Glass Group Featureline Moulding 75' Spool

IP T107BFL

$73.00

A little accent line that gives your installation some extra style.ach moulding is a counterpart to our original moulding. The T105BFL can be used in all applications where we recommend using the T105B and the T107BFL can be used in all applications where you use the T107B (see application chart on page 74). This is one of those nice things you can do for your customer without it costing you more.<font size="2" face="Verdana, Arial, Helvetica, sans-serif"><strong><em>*Thisitem is oversized and will have extra shipping charges</em></strong><em><strong>.</strong></em></font>

5/8" Channel Molding with Butyl

IP ET105B

$52.00

In addition to extremely high-quality moldings, Gold Glass Group also offers economy moldings. Do not let the word economy fool you. When Gold Glass Group uses the word "economy", it takes on a whole new meaning. These are high-quality moldings when compared to most competitors, they are considered the highest-quality available.

5/8" Feature Line molding with Butyl

IP ET105BFL

$51.00

In addition to extremely high-quality moldings, Gold Glass Group also offers economy moldings. Do not let the word economy fool you. When Gold uses the word economy, it takes on a whole new meaning. These are high-quality moldings and, when compared to most competitors, they would be considered the highest-quality available.

75' Long.

5/8" Gold Glass Group Featureline Moulding 75' Spool

IP T105BFL

$73.00

Each molding is a counterpart to our original molding. The T105BFL can be used in all applications where we recommend using the T105B, and the T107BFL can be used in all applications where you use the T107B. This is one of those nice things you can do for your customer without it costing you more.

Black Moulding Adhesive

IP BMG466

$8.00

An easy way to save money on OEM mouldings is to create your own using a universal moulding. When making mouldings that are mitered together or that meet at the bottom of the glass, you'll need an adhesive that permanently holds the moulding together.

Our Moulding Adhesive is super-strong and weather-resistant. It only takes a small drop to glue the moulding ends together, so each bottle has enough adhesive for hundreds of mouldings.

Channel Mouldings with Butyl 1"

IP ET108B

$52.00

In addition to extremely high-quality moldings, Gold Glass Group also offers economy moldings. Do not let the word economy fool you. When Gold uses the word economy, it takes on a whole new meaning. These are high-quality moldings and, when compared to most competitors, they would be considered the highest-quality available.

This item is oversized and will have extra shipping charges.

Channel Mouldings with Butyl 1-1/4"

IP ET109B

$52.00

In addition to extremely high-quality moldings, Gold Glass Group also offers economy moldings. Do not let the word economy fool you. When Gold uses the word economy, it takes on a whole new meaning. These are high-quality moldings and, when compared to most competitors, they would be considered the highest-quality available.

65' Long

This item is oversized and will have extra shipping charges.

Channel Mouldings with Butyl 3/4"

IP ET107B

$52.00

In addition to extremely high-quality moldings, Gold Glass Group also offers economy moldings. Do not let the word economy fool you. When Gold uses the word economy, it takes on a whole new meaning. These are high-quality moldings and, when compared to most competitors, they would be considered the highest-quality available.

This item is oversized and will have extra shipping charges.

Equalizer HeatWave™ 120 Volt Heat Gun

IP HGS353

$163.00

Perfect for reshaping moldings, drying pinchwelds, or warming glass and pinchwelds. This compact, lightweight, easy to use heat gun is perfect for dozens of shop uses. With temperature settings of 570° F and 1050° F and an airflow of 15 CFM at 3650 FPM, the HeatWave™ will handle a wide range of heating requirements where high and low heat is required. The HeatWave™ features an ergonomically designed Lexan® housing that is lightweight. It has an oil resistant, grounded neoprene 3-wire cord set. It has a built-in hand and switch guard with a double protected element housing and a wrap-around air intake. The air intake allows the gun to draw in the air while in the upright position. HeatWave™ has a hanging loop for easy storage and a built-in stand.

Made in the USA.

Equalizer® Hot Pocket

IP MHP139

$73.00

A portable option to keeping all urethane warm and easy to dispense and mouldings pliable. Heats up to 105°F and holds up to two boxes of moulding or 18+, 20oz. sausage pack urethane tubes. 

Draws only 2.8 amps of 12-Volt electricity and has a self protecting design that will not let it draw more than 5 amps. 12-Volt Urethane or Moulding Heater.

Made of Ballistic nylon.

Feature Line with Butyl 3/4"

IP ET107BFL

$51.00

Each molding is a counterpart to our original molding. The T105BFL can be used in all applications where we recommend using the T105B, and the T107BFL can be used in all applications where you use the T107B. This is one of those nice things you can do for your customer without it costing you more.

Rool contains 75' of molding.

This item is oversized and will have extra shipping charges.

Ford F-150 Moulding Clips

IP 1205001

$12.00

These Ford F-150 replacement molding clips offer an economical solution that is sometimes difficult to find at local dealerships. Designed as replacement clips for 2004 models and newer.

NAGS® Reference: DW1529 / DW1548 / DW1551 / DW1621

Package of 25

Moulding Clips for Ford F-150 2004 & Newer

Ford F-150, 250, & 350 • 20 Molding Clips

IP PCK1099

$8.00

Precision Molding Clips for Ford F-150, 250, 350.

NAGS® Reference DW1099.

Package of 20.

Gold Glass Group 75' Spool

IP T107B

$74.00

Gold Glass Group Mouldings do not shrink or discolor over time, never crimp around corners, always lay flush against the vehicle, never need a heat gun to install, and fit both thick windshields and thin tempered parts. A thin layer of butyl is in the channel of each moulding. When the moulding is pushed onto the glass, the butyl adheres to the edge of the glass and the moulding will not come off. T110 It is intended to replace push-in “Christmas Tree” mouldings. The great thing about this moulding is it has an adhesive under the part that goes against the vehicle. This adhesive sticks to the vehicle and holds the moulding in place while the urethane cures. The adhesive assures a perfect bond and the cured urethane holds it permanently in place.