Raven™ Blades

sort by:
  • 1
  • 2
view:

Blade Kit

IP 52000

$53.00

This kit features the most popular and frequently used blades for Falcon™ and Raven™ air tools. Each blade kit comes with four total blades including three Talon™ cold knife blades measuring 3/4", 1", and 1 & 1/2" plus one 2" straight offset cutting blade.

Included blades:

51847 - Equalizer® Talon™ Oscillating Powered Cold Knife Blade • 3/4"

51848 - Equalizer® Talon™ Oscillating Powered Cold Knife Blade • 1"

51849 - Equalizer® Talon™ Oscillating Powered Cold Knife Blades • 1-1/2"

51854 - Equalizer® Talon™ Oscillating Blade • Straight offset cutting blade • 2"

Reverse Ground Powered Cold Knife Blade • 1"

IP 51842

$12.00

These blades are the same as the 51847, 51848, and 51849 but with one very important difference; they are ground in the reverse direction from a regular cold knife blade. Some, very difficult to remove, back glasses can be cut out with a powered cold knife blade, but it must be sharpened in this reverse direction. Perfect for any time you want to cut close to the pinchweld.

These blades will fit the Falcon, Raven, and TimeSaver tools as well as most oscillating tools in the market.

Will not fit the Ninja™ line of tools.

Reverse Ground Powered Cold Knife Blade • 1-1/2"

IP 51843

$19.00

These blades are the same as the 51847, 51848, and 51849 but with one very important difference; they are ground in the reverse direction from a regular cold knife blade. Some, very difficult to remove, back glasses can be cut out with a powered cold knife blade, but it must be sharpened in this reverse direction. Perfect for any time you want to cut close to the pinchweld.

These blades will fit the Falcon, Raven, and TimeSaver tools as well as most oscillating tools in the market.

Will not fit the Ninja™ line of tools.

Reverse Ground Powered Cold Knife Blade • 3/4"

IP 51841

$11.00

These blades are the same as 51847, 51848, and 51849, but with one very important difference; they are ground in the reverse direction from regular cold knife blades. Some, very difficult to remove, back glasses can be cut out with a powered cold knife blade, but it must be sharpened in this reverse direction. Perfect for any time you want to cut close to the pinchweld.

These blades will fit the Falcon, Raven, and TimeSaver tools as well as most oscillating tools in the market.

Will not fit the Ninja™ line of tools.

Talon™ Oscillating Blade • Straight offset cutting blade • 2"

IP 51854

$24.00

Equalizer® Talon™ oscillating blades are made of high-quality flexible stainless steel, so they flex before they break. When Talon™ blades begin to flex, it indicates to the user to back-off and decreases the amount of pressure being applied. Talon™ blades are flat on one side enabling them to ride against the glass and cut urethane at the point of least resistance.

Talon™ oscillating blades fit the Falcon™, Raven™, and TimeSaver™ tools as well as most oscillating tools on the market.

Will not fit the Ninja™ line of tools.

Talon™ Oscillating Curved Cutting Blade • 1-1/2"

IP 51866

$16.00

Equalizer® Talon™ oscillating blades are made of high-quality flexible stainless steel, so they flex before they break. When Talon™ blades begin to flex, it indicates to the user to back-off and decreases the amount of pressure being applied. Talon™ blades are flat on one side enabling them to ride against the glass and cut urethane at the point of least resistance.

Talon™ oscillating blades fit the Falcon™, Raven™, and TimeSaver™ tools as well as most oscillating tools on the market.

Will not fit the Ninja™ line of tools.

Talon™ Oscillating Curved Offset Blade • 2-1/8"

IP 51853

$14.00

Equalizer® Talon™ oscillating blades are made of high-quality flexible stainless steel, so they flex before they break. When Talon™ blades begin to flex, it indicates to the user to back-off and decrease the amount of pressure being applied. Talon™ blades are flat on one side enabeling them to ride against the glass and cut urethane at the point of least resistance.

Talon™ oscillating blades fit the Falcon™, Raven™, and TimeSaver™ tools as well as most oscillating tools on the market.

Will not fit the Ninja™ line of tools.

Talon™ Oscillating Cut-Out Blade • 5-1/2" X 2-1/2"

IP 51846

$35.00

Some manufacturers of oscillating tools recommend that their tools be used with blades that are sharpened on both sides; believing it is easier to cut through the center of the urethane while not rubbing against the glass. For these users, we offer high-quality stainless steel blades that are sharpened on both sides.

These blades will fit Falcon, Raven, and TimeSaver tools as well as most oscillating tools in the market.

Equalizer® Talon™ Dual-Sharpened Oscillating Blades will not fit the Ninja™ line of tools. 

Made in the USA.

Talon™ Oscillating Cut-Out Blade • 5" X 2-1/4"

IP 51845

$33.00

Some manufacturers of oscillating tools recommend that their tools be used with blades that are sharpened on both sides; believing it is easier to cut through the center of the urethane while not rubbing against the glass. For these users, we offer high-quality stainless steel blades that are sharpened on both sides.

These blades will fit Falcon, Raven, and TimeSaver tools as well as most oscillating tools in the market.

Equalizer® Talon™ Dual-Sharpened Oscillating Blades will not fit the Ninja™ line of tools. 

Made in the USA.

Talon™ Oscillating Cut-Out Knife Blade • 3-3/4" x 2"

IP 51844

$28.00

Some manufacturers of oscillating tools recommend that their tools be used with blades that are sharpened on both sides; believing it is easier to cut through the center of the urethane while not rubbing against the glass. For these users, we offer high-quality stainless steel blades that are sharpened on both sides.

These blades will fit Falcon, Raven, and TimeSaver tools as well as most oscillating tools in the market.

Equalizer® Talon™ Dual-Sharpened Oscillating Blades will not fit the Ninja™ line of tools. 

Made in the USA.

Talon™ Oscillating Hooked Blade • 1-1/2"

IP 51857

$19.00

Equalizer® Talon™ oscillating blades are made of high-quality flexible stainless steel, so they flex before they break. When Talon™ blades begin to flex, it indicates to the user to back-off and decreases the amount of pressure being applied. Talon™ blades are flat on one side enabling them to ride against the glass and cut urethane at the point of least resistance.

Talon™ oscillating blades fit the Falcon™, Raven™, and TimeSaver™ tools as well as most oscillating tools on the market.

Will not fit the Ninja™ line of tools.

Talon™ Oscillating Hooked Blade • 2-1/2"

IP 51858

$23.00

Equalizer® Talon™ oscillating blades are made of high-quality flexible stainless steel, so they flex before they break. When Talon™ blades begin to flex, it indicates to the user to back-off and decreases the amount of pressure being applied. Talon™ blades are flat on one side enabling them to ride against the glass and cut urethane at the point of least resistance.

Talon™ oscillating blades fit the Falcon™, Raven™, and TimeSaver™ tools as well as most oscillating tools on the market.

Will not fit the Ninja™ line of tools.

Talon™ Oscillating Hooked Blade • 3-1/2"

IP 51859

$24.00

Equalizer® Talon™ oscillating blades are made of high-quality flexible stainless steel, so they flex before they break. When Talon™ blades begin to flex, it indicates to the user to back-off and decreases the amount of pressure being applied. Talon™ blades are flat on one side enabling them to ride against the glass and cut urethane at the point of least resistance.

Talon™ oscillating blades fit the Falcon™, Raven™, and TimeSaver™ tools as well as most oscillating tools on the market.

Will not fit the Ninja™ line of tools.

Talon™ Oscillating Hooked Blade • 3/4"

IP 51855

$18.00

Equalizer® Talon™ oscillating blades are made of high-quality flexible stainless steel, so they flex before they break. When Talon™ blades begin to flex, it indicates to the user to back-off and decreases the amount of pressure being applied. Talon™ blades are flat on one side enabling them to ride against the glass and cut urethane at the point of least resistance.

Talon™ oscillating blades fit the Falcon™, Raven™, and TimeSaver™ tools as well as most oscillating tools on the market.

Will not fit the Ninja™ line of tools.

Talon™ Oscillating Pinchweld Prep Blade • 1/2"

IP 51850

$16.00

Equalizer® Talon™ oscillating blades are made of high-quality flexible stainless steel, so they flex before they break. When Talon™ blades begin to flex, it indicates to the user to back-off and decreases the amount of pressure being applied. Talon™ blades are flat on one side enabling them to ride against the glass and cut urethane at the point of least resistance.

Talon™ oscillating blades fit the Falcon™, Raven™, and TimeSaver™ tools as well as most oscillating tools on the market.

Will not fit the Ninja™ line of tools.

  • 1
  • 2