Cold Knives

sort by:
  • 1
  • 2
view:

U-Groove Cut Out Knife

IP UCC320

$19.00

Cuts a groove for Christmas tree moldings. Many technicians use the shortcut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree molding is removed it is impossible to press it back into place. Our U-groove tool solves this problem by cutting a U-shaped groove for the Christmas tree molding to fit into. Two different width blades let you cut narrow or wide grooves. Also available with a pull handle. Comes with two blades, one small and one large.

Made in the USA.

U-Groove Cut Out Knife with Pull Handle

IP UCH319

$27.00

Cuts a groove for Christmas tree moldings. Many technicians use the shortcut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree molding is removed it is impossible to press it back into place. Our U-groove tool solves this problem by cutting a U-shaped groove for the Christmas tree molding to fit into. Two different width blades let you cut narrow or wide grooves. Available with or without a pull handle. Comes with two blades, one small and one large.

Made in the USA.

Large Groove Blade For The U-Groove Cut Out Knife

IP UCL322

$3.00

Cuts a groove for Christmas tree moldings. any technicians use the shortcut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree molding is removed it is impossible to press it back into place. Our U-groove tool solves this problem by cutting a U-shaped groove for the Christmas tree molding to fit into. Two different width blades let you cut narrow or wide grooves. Available with or without a pull handle. Comes with two blades, one small and one large.

Made in the USA.

Small Groove Blade For The U-Groove Cut Out Knife

IP UCS321

$3.00

Cuts a groove for Christmas tree moldings. any technicians use the shortcut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree molding is removed it is impossible to press it back into place. Our U-groove tool solves this problem by cutting a U-shaped groove for the Christmas tree molding to fit into. Two different width blades let you cut narrow or wide grooves. Available with or without a pull handle. Comes with two blades, one small and one large.

Made in the USA.

3/4" Z Cold Knife Blades • 5

IP Z1

$12.00

These innovative blades will remain flexible and retain their sharpness much longer than the average cold knife blade. The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance less when pulling the cold knife to cut the urethane. The end result is a cold knife blade that has the ability to resist breaking, last longer and keep a sharp edge. Equalizer produces two types of cold knife blades. Both the standard and the coined blades use the same proprietary hardening process.

The Coined Z Blade... The cutting surface of a coined cold knife blade has the cutting surface of the blade made thinner, only about 35 thousandths of an inch thick. A normal cold knife blade is 62 thousandths thick. Many technicians routinely grind cold knife blades thinner so they will cut easier. Sometimes this grinding will overheat a blade and damage the hardening. Coined Z blades are thinned before they are hardened so there is no need to grind them thinner.

Should I buy coined or not coined blades?

If you use a cold knife blade right out of the box and never grind it thinner, then use the standard thickness Z1, Z2, Z3, or Z7. If you like to take a new blade and grind it thinner before you use it, then you should purchase the "pre-thinned" Z4, Z5, Z6 or Z8.

Made in the USA.

1" Z Cold Knife Blades • 5

IP Z2

$12.00

These innovative blades will remain flexible and retain their sharpness much longer than the average cold knife blade. The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance less when pulling the cold knife to cut the urethane. The end result is a cold knife blade that has the ability to resist breaking, last longer and keep a sharp edge. Equalizer produces two types of cold knife blades. Both the standard and the coined blades use the same proprietary hardening process.

The Coined Z Blade... The cutting surface of a coined cold knife blade has the cutting surface of the blade made thinner, only about 35 thousandths of an inch thick. A normal cold knife blade is 62 thousandths thick. Many technicians routinely grind cold knife blades thinner so they will cut easier. Sometimes this grinding will overheat a blade and damage the hardening. Coined Z blades are thinned before they are hardened so there is no need to grind them thinner.

Should I buy coined or not coined blades?

If you use a cold knife blade right out of the box and never grind it thinner, then use the standard thickness Z1, Z2, Z3, or Z7. If you like to take a new blade and grind it thinner before you use it, then you should purchase the "pre-thinned" Z4, Z5, Z6 or Z8.

Made in the USA.

1-1/2" Z Cold Knife Blades • 5

IP Z3

$18.00

These innovative blades will remain flexible and retain their sharpness much longer than the average cold knife blade. The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance less when pulling the cold knife to cut the urethane. The end result is a cold knife blade that has the ability to resist breaking, last longer and keep a sharp edge. Equalizer produces two types of cold knife blades. Both the standard and the coined blades use the same proprietary hardening process.

The Coined Z Blade... The cutting surface of a coined cold knife blade has the cutting surface of the blade made thinner, only about 35 thousandths of an inch thick. A normal cold knife blade is 62 thousandths thick. Many technicians routinely grind cold knife blades thinner so they will cut easier. Sometimes this grinding will overheat a blade and damage the hardening. Coined Z blades are thinned before they are hardened so there is no need to grind them thinner.

Should I buy coined or not coined blades?

If you use a cold knife blade right out of the box and never grind it thinner, then use the standard thickness Z1, Z2, Z3, or Z7. If you like to take a new blade and grind it thinner before you use it, then you should purchase the "pre-thinned" Z4, Z5, Z6 or Z8.

Made in the USA.

3/4" Z Coined Cold Knife Blade • 5

IP Z4

$17.00

These innovative blades will remain flexible and retain their sharpness much longer than the average cold knife blade. The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance less when pulling the cold knife to cut the urethane. The end result is a cold knife blade that has the ability to resist breaking, last longer and keep a sharp edge. Equalizer produces two types of cold knife blades. Both the standard and the coined blades use the same proprietary hardening process.

The Coined Z Blade... The cutting surface of a coined cold knife blade has the cutting surface of the blade made thinner, only about 35 thousandths of an inch thick. A normal cold knife blade is 62 thousandths thick. Many technicians routinely grind cold knife blades thinner so they will cut easier. Sometimes this grinding will overheat a blade and damage the hardening. Coined Z blades are thinned before they are hardened so there is no need to grind them thinner.

Should I buy coined or not coined blades?

If you use a cold knife blade right out of the box and never grind it thinner, then use the standard thickness Z1, Z2, Z3, or Z7. If you like to take a new blade and grind it thinner before you use it, then you should purchase the "pre-thinned" Z4, Z5, Z6 or Z8.

Made in the USA.

1" Z Coined Cold Knife Blades • 5

IP Z5

$17.00

These innovative blades will remain flexible and retain their sharpness much longer than the average cold knife blade. The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance less when pulling the cold knife to cut the urethane. The end result is a cold knife blade that has the ability to resist breaking, last longer and keep a sharp edge. Equalizer produces two types of cold knife blades. Both the standard and the coined blades use the same proprietary hardening process.

The Coined Z Blade... The cutting surface of a coined cold knife blade has the cutting surface of the blade made thinner, only about 35 thousandths of an inch thick. A normal cold knife blade is 62 thousandths thick. Many technicians routinely grind cold knife blades thinner so they will cut easier. Sometimes this grinding will overheat a blade and damage the hardening. Coined Z blades are thinned before they are hardened so there is no need to grind them thinner.

Should I buy coined or not coined blades?

If you use a cold knife blade right out of the box and never grind it thinner, then use the standard thickness Z1, Z2, Z3, or Z7. If you like to take a new blade and grind it thinner before you use it, then you should purchase the "pre-thinned" Z4, Z5, Z6 or Z8.

Made in the USA.

1-1/2" Z Coined Cold Knife Blades • 5

IP Z6

$21.00

These innovative blades will remain flexible and retain their sharpness much longer than the average cold knife blade. The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance less when pulling the cold knife to cut the urethane. The end result is a cold knife blade that has the ability to resist breaking, last longer and keep a sharp edge. Equalizer produces two types of cold knife blades. Both the standard and the coined blades use the same proprietary hardening process.

The Coined Z Blade... The cutting surface of a coined cold knife blade has the cutting surface of the blade made thinner, only about 35 thousandths of an inch thick. A normal cold knife blade is 62 thousandths thick. Many technicians routinely grind cold knife blades thinner so they will cut easier. Sometimes this grinding will overheat a blade and damage the hardening. Coined Z blades are thinned before they are hardened so there is no need to grind them thinner.

Should I buy coined or not coined blades?

If you use a cold knife blade right out of the box and never grind it thinner, then use the standard thickness Z1, Z2, Z3, or Z7. If you like to take a new blade and grind it thinner before you use it, then you should purchase the "pre-thinned" Z4, Z5, Z6 or Z8.

Made in the USA.

1-1/4" Z Cold Knife Blades • 5

IP Z7

$18.00

These innovative blades will remain flexible and retain their sharpness much longer than the average cold knife blade. The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance less when pulling the cold knife to cut the urethane. The end result is a cold knife blade that has the ability to resist breaking, last longer and keep a sharp edge. Equalizer produces two types of cold knife blades. Both the standard and the coined blades use the same proprietary hardening process.

The Coined Z Blade... The cutting surface of a coined cold knife blade has the cutting surface of the blade made thinner, only about 35 thousandths of an inch thick. A normal cold knife blade is 62 thousandths thick. Many technicians routinely grind cold knife blades thinner so they will cut easier. Sometimes this grinding will overheat a blade and damage the hardening. Coined Z blades are thinned before they are hardened so there is no need to grind them thinner.

Should I buy coined or not coined blades?

If you use a cold knife blade right out of the box and never grind it thinner, then use the standard thickness Z1, Z2, Z3, or Z7. If you like to take a new blade and grind it thinner before you use it, then you should purchase the "pre-thinned" Z4, Z5, Z6 or Z8.

Made in the USA.

1-1/4" Z Coined Cold Knife Blades • 5

IP Z8

$21.00

These innovative blades will remain flexible and retain their sharpness much longer than the average cold knife blade. The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance less when pulling the cold knife to cut the urethane. The end result is a cold knife blade that has the ability to resist breaking, last longer and keep a sharp edge. Equalizer produces two types of cold knife blades. Both the standard and the coined blades use the same proprietary hardening process.

The Coined Z Blade... The cutting surface of a coined cold knife blade has the cutting surface of the blade made thinner, only about 35 thousandths of an inch thick. A normal cold knife blade is 62 thousandths thick. Many technicians routinely grind cold knife blades thinner so they will cut easier. Sometimes this grinding will overheat a blade and damage the hardening. Coined Z blades are thinned before they are hardened so there is no need to grind them thinner.

Should I buy coined or not coined blades?

If you use a cold knife blade right out of the box and never grind it thinner, then use the standard thickness Z1, Z2, Z3, or Z7. If you like to take a new blade and grind it thinner before you use it, then you should purchase the "pre-thinned" Z4, Z5, Z6 or Z8.

Made in the USA.

3/8" Z Cold Knife Blades • 5

IP Z9

$13.00

3/8" Equalizer® Z Cold Knife Blades (Pkg. 5)

These innovative blades will remain flexible and retain their sharpness much longer than the average cold knife blade. The grinding of the blade is at a greater angle than other cold knife blades. This makes the resistance less when pulling the cold knife to cut the urethane. The end result is a cold knife blade that has the ability to resist breaking, last longer and keep a sharp edge. Equalizer produces two types of cold knife blades. Both the standard and the coined blades use the same proprietary hardening process.

The Coined Z Blade... The cutting surface of a coined cold knife blade has the cutting surface of the blade made thinner, only about 35 thousandths of an inch thick. A normal cold knife blade is 62 thousandths thick. Many technicians routinely grind cold knife blades thinner so they will cut easier. Sometimes this grinding will overheat a blade and damage the hardening. Coined Z blades are thinned before they are hardened so there is no need to grind them thinner.

Should I buy coined or not coined blades?

If you use a cold knife blade right out of the box and never grind it thinner, then use the standard thickness Z1, Z2, Z3, or Z7. If you like to take a new blade and grind it thinner before you use it, then you should purchase the "pre-thinned" Z4, Z5, Z6 or Z8.

Made in the USA

ZipKnife™ Long Knife • 12"

IP ZKLK34

$54.00

ZipKnife Long Knives are made with an extremely thin utility knife bracket and are designed to enable quick blade replacements. The knife has no screws, levers, or devices thus lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

 
•Thin blade holder for hard-to-reach areas
•Quick blade change design 


ZipKnife™ Long Knife • 20"

IP ZKLK36

$58.00

ZipKnife Long Knives are made with an extremely thin utility knife bracket and are designed to enable quick blade replacements. The knife has no screws, levers, or devices thus lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

 

• Thin blade holder for hard-to-reach areas

• Quick blade change design

ZipKnife™ Long Knife • 24"

IP ZKLK38

$81.00

ZipKnife Long Knives are made with an extremely thin utility knife bracket and are designed to enable quick blade replacements. The knife has no screws, levers, or devices thus lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

 
• Thin blade holder for hard-to-reach areas
• Quick blade change design

ZipKnife Cold Knife Set

IP ZKS80

$163.00

ZipKnife Cold Knife has a unique design that allows you to maintain a high level of control at the cutting head, giving you the freedom to move unencumbered while exerting pressure in both cutting directions.

 

Uses all standard cold knife blades.

 

Set includes 1-ZK35, Zipknife and 1-ZK45-Compact Zipknife. 

ZipKnife™ Cold Knife

IP ZK35

$92.00

ZipKnife Cold Knife has a unique design that allows you to maintain a high level of control at the cutting head, giving you the freedom to move unencumbered while exerting pressure in both cutting directions.

 

Uses all standard cold knife blades.

ZipKnife™ Compact Cold Knife

IP ZK45

$103.00

ZipKnife Compact Cold Knife is designed to cut urethane in hard-to-reach areas like quarter glasses or vent glasses and is perfect for labor-intensive removals in areas around racks, cab-over camper shells, and decklids. Uses all standard cold knife blades.


ZipKnife™ Set

IP ZKS37

$148.00

Set includes 1 of Each; ZK35 ZipKnife Cold Knife and the ZKLK36 20" ZipKnife Long Knife.

 

ZipKnife Cold Knife has a unique radius that allows you to maintain a high level of control of the cutting head while permitting you freedom of movement exerting pressure in both cutting directions. Uses all standard cold knife blades.

 

ZipKnife Long Knife is made with an extremely thin utility knife bracket and features a quick blade replacement design. The knives have no screws, levers, or devices lessening the chance of damaging a vehicle. Uses all standard utility knife blades.


ZipKnife™ Set

IP ZKS47

$145.00

Set includes 1 of Each; ZK45 ZipKnife Compact Cold Knife and the ZKLK34 12" ZipKnife Long Knife.

 

ZipKnife Long Knives are made with an extremely thin utility knife bracket and a quick blade replacement design. The knives have no screws, levers, or devices lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

 

The ZipKnife Compact Cold Knife is designed to remove the glass in hard-to-reach areas such as quarter glasses and vent glasses as well as labor-intensive removals such as the areas around racks, cab-over camper shells, and decklids. Uses all standard cold knife blades.

Power Advance Cold Knife

IP NEC398

$70.00

Designed with an adjustable Y-shaped attachment and a unique blade retaining method that lets you change the blade in seconds and set the blade to any depth. Comes with one 1" blade.

Made in the USA.

Push-Button Release Cold Knife

IP PBR313

$65.00

Quickly change blades with a push of a button.

Made with a textured grip and coated wire handle.

Comes with one RKB10SS blade.

Made in the USA.

Standard Cold Knife

IP GK380

$24.00

These knives have a stainless steel pull cable with a fused end flute and large, easy-to-grasp aluminum pull handle that is virtually indestructible.

4-3/8" Long and comes with one Z2 Blade.  

Economy Cold Knife

IP CTK382

$21.00

This affordable cold knife has a stainless steel pull cable with a fused end flute and a large, easy-to-grasp aluminum pull handle that is virtually indestructible.

5" Long and comes with one Z4 Blade.  

Quicknife™

IP BNQ271

$69.00

Equalizer® Quicknife™is a fully adjustable cold knife with a unique lever design which creates quick blade changes and fully variable height adjustments without having to release pins or loosen bolts. 

The unique clamping device within the Quicknife™ locks blades without pins or bolts through the knife holes.

Additionally, the pull handle is attached to the body so removing the handle isn't necessary to exchange blades.

Features an oblong aluminum handle, not round, preventing twisting in your hand while cutting or rolling off of a vehicle if placed on the hood.  The pull handle is foam-covered  for increased comfort.

Includes one Z2 Blade.

Made in the USA.

Quicknife™ SL

IP BQS257

$67.00

A fully adjustable cold knife with unique quick lever design for fast blade change and height adjustment without pins or bolts. 

1-1/4"W and comes with one Z2 Blade.  

UltraWiz® Cold Knife

IP PN3001K

$26.00

UltraWiz® Cold Knife is shaped for comfort and gripping power. The handle is oblong so it will not easily spin in your hand. The pull handle is built into the body and not bolted to the blade. The PN3001K is designed for a quick blade change; simply loosen one screw and change the blade in seconds. It has a high strength Derlin® handle to resist scratching the finish of the vehicle. This is important because some of the new vehicles have seven different layers of paint and are impossible to touch up. Comes with one blade.

Made in the USA.

UltraWiz® UltraOne Adjustable Cable Cold Knife

IP 3005K

$23.00

Auto Glass Technicians know that UltraWiz® has a reputation for quality cold knives and some of the strongest, sharpest and thinnest cold knife blades in the industry. This cold knife combines all you have come to expect from UltraWiz®, plus a one-set-screw system that allows quick-changes and a fully adjustable blade. A unique, durable foam cover offers comfort for the technician and scratch resistance for vehicle protection.

Comes with one 1" blade.

Cold Knife with Red Cover & 1.5" Blade

IP CK304

$29.00

Paint jobs have become more intricate with anywhere from three to seven layers of paint being applied.

If you damage the paint you are in trouble!

To help prevent body damage, Equalizer® has added a soft, Neoprene cover to our GK380 Standard Cold Knife. Additionally, it gives the cold knife a comfortable and soft, non-slip grip.

The covered wire on the pull handle prevents damage to the hood, vertical posts, and other painted parts.

  • 1
  • 2