Vehicle Protection

sort by:
  • 1
view:

BounceBACK™ Absorbing Tape

IP MCT720A

$25.00

Impact absorbing tape for BounceBACK™ Pinchweld Protection System.

2" wide and 180' Long 

BounceBACK™ Pinchweld Protection System

IP MDP181

$48.00

Protecting the pinchweld when removing the glass has always been a problem for technicians. When a protector was placed between the glass and pinchweld the repeated hits by a power tool blade would cause that protector to jump out of the pinchweld, leaving the paint exposed to potential harm and tape would work to some extent, but would not hold sufficient downward pressure to keep the pinchweld protector in place.

Equalizer’s own Gilbert Gutierrez came up with a solution to use hold-down vacuum cups in conjunction with a protector. When Equalizer placed the vacuum cups with the BounceBACK™, a metal protector coated with impact absorbing tape, invented by John Hutzel, we produced the BounceBACK™ Pinchweld Protection System. The 4 different lengths of coated pliable metal can be bent around any curve and will absorb repeated striking from the blade. There are many places where BounceBACK™ will be useful, but most important are the new vehicles that have no molding around the glass. Even a small nick on those vehicles is easy to see from outside and can result in the need to have that part of the vehicle repainted. The BounceBACK™ Pinchweld Protection System includes one of each 12”, 18”, 24”, and 48” long coated pinchweld protectors, and four vacuum cup hold-down tools.

After extended use, the coating on the pinchweld protectors can become worn. When this happens you can remove the old coating and replace it with a fresh coating of impact absorbing tape. Each roll is 2” wide and 180’ long.

BounceBACK™ 18" Pinchweld Protector

IP MET184

$4.00

Replacement 18" pinchweld protector for the Equalizer® BounceBACK™ Pinchweld Protection System.

BounceBACK™ 48" Pinchweld Protector

IP MLP182

$10.00

Replacement 18" pinchweld protector for the Equalizer® BounceBACK™ Pinchweld Protection System

BounceBACK™ 24" Pinchweld Protector

IP MTF183

$5.00

Replacement 24" Pinchweld Protector for Equalizer® BounceBACK™ Pinchweld Protection System.

BounceBACK™ 12" Pinchweld Protector

IP MTI185

$3.00

Replacement 12" Pinchweld Protector for Equalizer® BounceBACK™ Pinchweld Protection System.

Ricochet™ Pinchweld Protector • 18"

IP PEL815

$4.00

Replacement 18" Pinchweld Protector for Equalizer® Ricochet™ Pinchweld Protection System (PHV859).

Ricochet™ Pinchweld Protector • 48"

IP PFE820

$10.00

Replacement 48" Pinchweld Protector for Equalizer® Ricochet™ Pinchweld Protection System (PHV859).

Replacement Vacuum Cup

IP PHO813

$10.00

Replacement Vacuum Cup for Equalizer® Ricochet™ Pinchweld Protection System (PHV859) or Equalizer® BounceBACK™ Pinchweld Protection System (MDP181). 

Ricochet™ Pinchweld Protector • 12"

IP PHS814

$3.00

Replacement 12" Pinchweld Protector for Equalizer® Ricochet™ Pinchweld Protection System (PHV859).

Ricochet™ Pinchweld Protection System

IP PHV859

$48.00

Protecting the pinchweld while removing glass has always been a problem for technicians. Every protector technicians used could not withstand the repeated hits by power tool blades. Additionally, blades can jump out of the pinchweld, leaving the paint exposed to potential harm. Tape works to some extent but will not hold sufficient downward pressure to keep pinchweld protectors in place. The solution to this problem is Ricochet™ Pinchweld Protection System, invented by Equalizer’s own Gilbert Gutierrez.

This kit includes four different lengths of a high impact plastic that will absorb repeated strikes from blades. It uses a vacuum hold down tool to keep the pinchweld protector in place. There are many places where this can be useful, like new vehicles that do not have molding around the glass. Small nicks on these types of vehicles are easy to see and can result in having to have part of the vehicle repainted. Ricochet™ Pinchweld Protection System includes: one each 12”, 18”, 24”, and 48” long pinchweld protectors plus four vacuum hold down tools.

Ricochet™ Pinchweld Protector • 24"

IP PTF816

$5.00

Replacement 24" Pinchweld Protector for Equalizer® Ricochet™ Pinchweld Protection System (PHV859).

Reusable Seat Protector

IP RSP1371

$33.00

The reusable seat protector is made of heavy-duty nylon and double stitched for increased durability. It has an inverted pocket on the back top portion to cover the headrest and hold itself securely in place for maximum protection.


Paint Protector

IP VTP586

$60.00

Many technicians place the vehicle’s cowling, screws, and parts on top of a vehicle's hood when they are replacing a windshield. The problem with laying all these items on a vehicle's hood is the possibility of damaging the paint. Protect the vehicle with our Paint Protector. Made of a thick yet soft and soil-proof vinyl.

Clear Headliner Protector

IP HP564

$18.00

Provides protection for the A-pillar trim and the headliner while using our cord and wire cut-out tools.

 

Invented by: Gilbert Gutierrez & Jason Horne

Protect-A-Dash™

IP CU1077

$30.00

This clear dash protector provides protection for the A-pillar trim and the headliner while using our cut-out tools.

Foam Tool Tray

IP FT1079

$50.00

Made of a lightweight, soft foam material that will not damage the vehicle. Has dual handles for easy carrying with a recessed area that is perfect for holding hand tools, screws, nuts, & bolts safely and securely.


TightSpot™

IP TSP292

$10.00

When installed in the proper position, TightSpot™ prevents damage to the vehicle being worked on or the one parked next to it. They are made of dense foam rubber with a soft vacuum cup.

Includes two protectors per package.

Invented by: Temoc Reynosa  

All-In-One Vehicle Protection System • 200

IP VPS700

$173.00

Ideal, complete protection for vehicle interiors. VPS700 contains five high-quality protection elements in one set. Each set consists of a seat with integrated floormat, steering wheel, gear selector, and handbrake covers.

Comes with 200 pieces per roll.

Slip-N-Grip® Steering Wheel Covers • 250

IP PY1369

$60.00

Keep the steering wheel clean with universal fit Slip-N-Grip® Steering Wheel Protectors. 

Box of 250.

Slip-N-Grip® Seat Covers • 250

IP PX1368

$85.00

Slip-N-Grip® Seat Covers protect while gripping the seating surface, keeping the cover in place and protecting the seat while you work in the vehicle. 100% recyclable.

Box of 250.

Slip-N-Grip® Floor Mats • 500

IP PZ1370

$85.00

Made of tough, durable plastic. Unlike paper mats, these plastic mats stay in place and will not degrade if they become wet.

Box includes 500 units. 

WindowGuard™ • 60'

IP CWS77

$75.00

WindowGuard™ enables a vehicle to be driven while awaiting replacement glass. If the vehicle needs to be stored outside while awaiting the replacement, WindowGuard™ protects the interior until the glass can be installed. The special, no-residue adhesive makes WindowGuard™ strong enough for driving speeds, yet peels off cleanly upon removal.

It’s quick, economical, and effective. Made of a clear, flexible self-adhesive film, WindowGuard™ is perforated every 36” to make installations fast and easy with no messy cleanup! The extra clear material provides good visibility. Not for use on the windshield for driving on public roads. 

60' Roll.

WindowGuard™ • 99'

IP CWP289

$117.00

WindowGuard™ enables a vehicle to be driven while awaiting replacement glass. If the vehicle needs to be stored outside while awaiting the replacement, WindowGuard™ protects the interior until the glass can be installed. The special, no-residue adhesive makes WindowGuard™ strong enough for driving speeds, yet peels off cleanly upon removal.

It’s quick, economical, and effective. Made of a clear, flexible self-adhesive film, WindowGuard™ is perforated every 36” to make installations fast and easy with no messy cleanup! The extra clear material provides good visibility. Not for use on the windshield for driving on public roads.

99' Roll. 

  • 1