Protection

sort by:
  • 1
  • 2
view:

BounceBACK™ Absorbing Tape

IP MCT720A

$25.00

Impact absorbing tape for BounceBACK™ Pinchweld Protection System.

2" wide and 180' Long 

BounceBACK™ Pinchweld Protection System

IP MDP181

$48.00

Protecting the pinchweld when removing the glass has always been a problem for technicians. When a protector was placed between the glass and pinchweld the repeated hits by a power tool blade would cause that protector to jump out of the pinchweld, leaving the paint exposed to potential harm and tape would work to some extent, but would not hold sufficient downward pressure to keep the pinchweld protector in place.

Equalizer’s own Gilbert Gutierrez came up with a solution to use hold-down vacuum cups in conjunction with a protector. When Equalizer placed the vacuum cups with the BounceBACK™, a metal protector coated with impact absorbing tape, invented by John Hutzel, we produced the BounceBACK™ Pinchweld Protection System. The 4 different lengths of coated pliable metal can be bent around any curve and will absorb repeated striking from the blade. There are many places where BounceBACK™ will be useful, but most important are the new vehicles that have no molding around the glass. Even a small nick on those vehicles is easy to see from outside and can result in the need to have that part of the vehicle repainted. The BounceBACK™ Pinchweld Protection System includes one of each 12”, 18”, 24”, and 48” long coated pinchweld protectors, and four vacuum cup hold-down tools.

After extended use, the coating on the pinchweld protectors can become worn. When this happens you can remove the old coating and replace it with a fresh coating of impact absorbing tape. Each roll is 2” wide and 180’ long.

BounceBACK™ 18" Pinchweld Protector

IP MET184

$4.00

Replacement 18" pinchweld protector for the Equalizer® BounceBACK™ Pinchweld Protection System.

BounceBACK™ 48" Pinchweld Protector

IP MLP182

$10.00

Replacement 18" pinchweld protector for the Equalizer® BounceBACK™ Pinchweld Protection System

BounceBACK™ 24" Pinchweld Protector

IP MTF183

$5.00

Replacement 24" Pinchweld Protector for Equalizer® BounceBACK™ Pinchweld Protection System.

BounceBACK™ 12" Pinchweld Protector

IP MTI185

$3.00

Replacement 12" Pinchweld Protector for Equalizer® BounceBACK™ Pinchweld Protection System.

Ricochet™ Pinchweld Protector • 18"

IP PEL815

$4.00

Replacement 18" Pinchweld Protector for Equalizer® Ricochet™ Pinchweld Protection System (PHV859).

Ricochet™ Pinchweld Protector • 48"

IP PFE820

$10.00

Replacement 48" Pinchweld Protector for Equalizer® Ricochet™ Pinchweld Protection System (PHV859).

Replacement Vacuum Cup

IP PHO813

$10.00

Replacement Vacuum Cup for Equalizer® Ricochet™ Pinchweld Protection System (PHV859) or Equalizer® BounceBACK™ Pinchweld Protection System (MDP181). 

Ricochet™ Pinchweld Protector • 12"

IP PHS814

$3.00

Replacement 12" Pinchweld Protector for Equalizer® Ricochet™ Pinchweld Protection System (PHV859).

Ricochet™ Pinchweld Protection System

IP PHV859

$48.00

Protecting the pinchweld while removing glass has always been a problem for technicians. Every protector technicians used could not withstand the repeated hits by power tool blades. Additionally, blades can jump out of the pinchweld, leaving the paint exposed to potential harm. Tape works to some extent but will not hold sufficient downward pressure to keep pinchweld protectors in place. The solution to this problem is Ricochet™ Pinchweld Protection System, invented by Equalizer’s own Gilbert Gutierrez.

This kit includes four different lengths of a high impact plastic that will absorb repeated strikes from blades. It uses a vacuum hold down tool to keep the pinchweld protector in place. There are many places where this can be useful, like new vehicles that do not have molding around the glass. Small nicks on these types of vehicles are easy to see and can result in having to have part of the vehicle repainted. Ricochet™ Pinchweld Protection System includes: one each 12”, 18”, 24”, and 48” long pinchweld protectors plus four vacuum hold down tools.

Ricochet™ Pinchweld Protector • 24"

IP PTF816

$5.00

Replacement 24" Pinchweld Protector for Equalizer® Ricochet™ Pinchweld Protection System (PHV859).

Equalizer® Trucker Cap

IP EQCAP

$30.00

Mesh paneled, baseball cap with custom side stiching of Texas and Auto Glass Tools with an exclusively designed Equalizer® patch on the front.

Equalizer® Ball Cap

IP ETS776

$18.00

Crafted from quality materials, this 6-panel cap features a pre-formed visor and a Velcro® closure for easy adjustment. Black cap with our signature red Equalizer® logo across the front.

Made in the USA.

Equalizer™ Black LED Hat

IP BLH19

$18.00

Equalizer™ LED hat features Ultra Bright LED technology provides you with a perfect hands-free flashlight. 4 LEDs are concealed under the brim with dual beams for long on widespread light coverage.

Equalizer™ Grey Textured LED Hat

IP TLH20

$30.00

Equalizer™ LED hat features Ultra Bright LED technology provides you with a perfect hands-free flashlight. 4 LEDs are concealed under the brim with dual beams for long on widespread light coverage.

Full-Finger Mechanics Gloves • M

IP RI1379

$31.00

These low profile gloves allow for both dexterity and protection. Made of a lightweight, breathable material with a synthetic leather palm. Machine washable. 

 

Size: Medium

Full-Finger Mechanics Gloves • L

IP RJ1380

$31.00

These low profile gloves allow for both dexterity and protection. Made of a lightweight, breathable material with a synthetic leather palm. Machine washable. 

 

Size: Large

Full-Finger Mechanics Gloves • XL

IP RK1381

$31.00

These low profile gloves allow for both dexterity and protection. Made of a lightweight, breathable material with a synthetic leather palm. Machine washable. 

 

Size: Extra Large

Full-Finger Anti-Vibration Gloves • M

IP RF1376

$42.00

These gloves feature a 100% silicone gel padding in critical palm areas with has non-slip reinforcements and are oil and water resistant. Machine Washable.

Size Medium

Full-Finger Anti-Vibration Gloves • L

IP RG1377

$42.00

These gloves feature a 100% silicone gel padding in critical palm areas with has non-slip reinforcements and are oil and water resistant. Machine Washable.

Size: Large

Full-Finger Anti-Vibration Gloves • XL

IP RH1378

$42.00

These gloves feature a 100% silicone gel padding in critical palm areas with has non-slip reinforcements and are oil and water resistant. Machine Washable.

Size: Extra Large

Black Nitrile Gloves • Large

IP BNG418

$21.00

Chemical and puncture resistant gloves. Latex and powder free.

Made of 100% nitrile.

Box of 100 Large gloves.

Black Nitrile Gloves • XLarge

IP BNL820

$21.00

Chemical and puncture resistant gloves. Latex and powder free.

Made of 100% nitrile.

Box of 100 Extra Large gloves.

Black Nitrile Gloves • XXLarge

IP BNX408

$21.00

Chemical and puncture resistant gloves. Latex and powder free.

Made of 100% nitrile.

Box of 100 Large gloves.

 

Powder-Free Nitrile Gloves • L

IP CB1057

$17.00

Powder-free Blue Nitrile Gloves. Made of 100% nitrile and are latex-free.

Box of 100.

Size: Large

Powder-Free Nitrile Gloves • XL

IP CC1058

$17.00

Powder-free Blue Nitrile Gloves. Made of 100% nitrile and are latex-free. Box of 100.

Size: Extra Large

Kevlar® Gloves • L

IP IZ1217

$23.00

These seamless knit gloves have a natural rubber coating for excellent wet or dry grip and are made of 7-gauge 100% Kevlar®.

Size: Large

Kevlar® Gloves • XL

IP JA1218

$23.00

These seamless knit gloves have a natural rubber coating for excellent wet or dry grip and are made of 7-gauge 100% Kevlar®.

Size: Extra Large

Arm Protector Gloves

IP LU1271

$42.00

Equalizer® Arm Protector Gloves are made of durable Kevlar® material with double layers of protection that protect your arms cuts from glass or metal. 

Two per order. 

  • 1
  • 2