Oscillating

sort by:
  • 1
  • 2
view:

Ninja™ Deluxe Kit

IP ENK148

$281.00

This tool has the look and feels of a cold knife, but cuts with incredible power. As you pull the tool forward, it is retracting and then thrusting into the urethane at an astonishing rate of 367 times a second.

Kit Includes one of each; ENT840, ENO841, and ENL842 Ninja Blade.

All packaged in a case. 

Ninja™ Standard Kit

IP ENJ147

$206.00

This tool has the look and feel of a cold knife but cuts with incredible power. As you pull the tool forward, it is retracting and then thrusting into the urethane at an astonishing rate of 367 times a second.

Includes one ENO841 Ninja Blade. 

Ninja™ GT Standard Kit

IP EGT149

$250.00

Ninja™ GT is a heavy-duty version of Ninja™. It has dual ball bearings, a more powerful motor, and an exhaust muffler that routes escaping air away from the vehicle.

Feature a unique ability to cut under hoods, trunk lids, and anything else that overhangs the glass and obstructs your ability to cut.

When you encounter a hood, visor, or trunk lid; position the blade approximately at a 90° angle which allows the tool to go under these areas.

Equalizer® Ninja™ GT
standard Kit comes with one 1" blade.

Ninja™ GT Deluxe Kit

IP EGK150

$343.00

Ninja™ GT is a heavy-duty version of Ninja™. It has dual ball bearings, a more powerful motor, and an exhaust muffler that routes escaping air away from the vehicle.

Feature a unique ability to cut under hoods, trunk lids, and anything else that overhangs the glass and obstructs your ability to cut.

When you encounter a hood, visor, or trunk lid; position the blade approximately at a 90° angle which allows the tool to go under these areas.

Equalizer® Ninja™ GT
Deluxe Kit comes with one each of the following:

3/4", 1", 1-1/2" blades, and a plastic carrying case.

TimeSaver™

IP ETS6602

$236.00

Equalizer® TimeSaver™ is a heavy-duty oscillating pneumatic tool that uses a wide, side-to-side cutting action to slice through the thickest of urethane beads.

Includes one TSB6603 TimeSaver Blade.

 

Falcon™

IP ESM519

$210.00

Our heavy-duty oscillating pneumatic tool designed with a large powerful motor to cut through tough urethane.

Includes one 51851 Talon Blade. 

Raven™

IP ESM517

$154.00

Designed to cut along flush-mounted or encapsulated urethane set auto glass. Easily converts to an air-powered cold knife. 

Includes one 51851 Talon™ blade.

 

Reverse Ground Powered Cold Knife Blade • 3/4"

IP 51841

$11.00

These blades are the same as 51847, 51848, and 51849, but with one very important difference; they are ground in the reverse direction from regular cold knife blades. Some, very difficult to remove, back glasses can be cut out with a powered cold knife blade, but it must be sharpened in this reverse direction. Perfect for any time you want to cut close to the pinchweld.

These blades will fit the Falcon, Raven, and TimeSaver tools as well as most oscillating tools in the market.

Will not fit the Ninja™ line of tools.

Reverse Ground Powered Cold Knife Blade • 1"

IP 51842

$12.00

These blades are the same as the 51847, 51848, and 51849 but with one very important difference; they are ground in the reverse direction from a regular cold knife blade. Some, very difficult to remove, back glasses can be cut out with a powered cold knife blade, but it must be sharpened in this reverse direction. Perfect for any time you want to cut close to the pinchweld.

These blades will fit the Falcon, Raven, and TimeSaver tools as well as most oscillating tools in the market.

Will not fit the Ninja™ line of tools.

Reverse Ground Powered Cold Knife Blade • 1-1/2"

IP 51843

$19.00

These blades are the same as the 51847, 51848, and 51849 but with one very important difference; they are ground in the reverse direction from a regular cold knife blade. Some, very difficult to remove, back glasses can be cut out with a powered cold knife blade, but it must be sharpened in this reverse direction. Perfect for any time you want to cut close to the pinchweld.

These blades will fit the Falcon, Raven, and TimeSaver tools as well as most oscillating tools in the market.

Will not fit the Ninja™ line of tools.

Fein Air-Powered SuperCut

IP MLX625

$365.00

The Fein® Air-Powered SuperCut runs at a maximum speed of 20,000 rpm making it a very fast cutting tool. The recommended air pressure is 90 psi and the fact that it consumes 23 CFM tells you that it has tremendous power. It is compact, measuring only 8" long x 1-3/4" wide x 1-3/4" tall, and weighs less than 2 pounds. One unusual thing about the tool is the method that is used to change the blades. Unlike other tools, the Fein® Air-Powered SuperCut uses a double wrench tightening system that prevents pressure from being applied to the drive bearing when the blade is tightened. Comes with 1-Fein® Air-Powered SuperCut and two blade wrenches. 

Fein 3/4" Blade • 2

IP FTB208

$67.00

Cutting part is 3/4” long.

Sharpened one side regular, one side serrated.

Fein® Part No. 6 39 03 208 01 0

Package of two.

 

Fein 1" Blade • 2

IP FTB20712

$67.00

Cutting part 1” long.

Sharpening: one side regular, one side serrated.

Fein® Part No. 6 39 03 207 01 2

Package of two.

Fein 1-1/2" Blade • 2

IP FTB209

$67.00

Cutting part 1-1/2” long.

Sharpening: one side regular, one side serrated.

Fein® Part No. 6 39 03 209 01 4

Package of two.

Fein 2-1/4" blade Pkg. of 2

IP FTB081

$130.00

FTB081 • Fein® Part No. 6 39 03 081 01 3
Cutting part 2-1/4”. Total length 4-3/4”.
Sharpening 1 side regular one side serrated. Z bend

Package of 2

  • 1
  • 2