Tools

sort by:
view:

Glass Removal Start-Up Kit

IP GRK687

$999.00

Includes the Viper™ Wire Removal System
With the trend in automobiles moving to exposed edge glass and having small, hard to maneuver quarter glasses and sliders, we felt we needed a starter kit that included a wire removal tool to safely get in these areas and remove the glass without damaging the vehicle. That’s how we came up with our new Glass Removal Start-Up Kit. It comes with everything a new technician will need to remove auto glass and prep the area for replacement. This includes the Viper™ Wire Removal System as well as many other industry-specific tools. This kit is intended to build on a basic set of tools that most people into the auto glass in already have and make it into a set of tools for an Auto Glass Technician.

 

Kit Contents-

1 • VIP1138 • Equalizer® Viper™ Wire Removal Kit
1 • SKE291 • PrepMaster Kit
1 • NPD221 • BLOWHARD™
1 • FSG130 • Clear Safety Glasses
1 • GBM446 • PryBaby™ Tool Set
1 • HTS923 • Hook & Pick Set
2 • IS742 • Standard Windshield Stick
2 • ISC741 • Windshield Stick Chisel End
1 • MB743 • Mirror Bracket Wrench (Torx®)
1 • MBR600 • Equalizer® Mirror Torx® Wrench
1 • MR747 • Moulding Release Tool
1 • RT753 • Hook Tool
1 • TPE657 • Cowling Clip Removal Tool
1 • VTP586 • Paint Protector
1 • BNQ271 • Cold Knife
1 • ALK230 • Adjustable Length Cutting Knife
1 • HRT367 • Hose Removal Pliers
1 • JFT323 • Equalizer® LongHorn Seat Release
1 • WP534E • Wiper Puller
1 • VZB10 • Z Blades Variety Pack (9)
1 • 98027 • Metric Folding Hex Wrenches
1 • 98057 • Torx® Folding Wrenches
1 • RB497 • Razor Blades (sleeve of 100)
1 • RMI309 • Rearview Mirror Installer
1 • TCR370 • Toyota/Honda Clip Remover
1 • UKB498 • Utility Knife Blades (Pkg of 100)
1 • DUR748 • Door Upholstery Remover

 

Basic Technician Kit

IP ATK658

$737.00

Most people who start training to become an auto glass technician already possess a small set of tools. Usually, they have a Phillips and straight screwdriver, wrenches, and hopefully a set of metric and inch size sockets. This kit is intended to build on that set of tools and make it into a set of tools for an Auto Glass Technician. We developed this kit by asking some of the most respected technicians in the country to give their feedback on what should be included in a basic technician kit. There were many variations, but the tools that are included in this kit are the ones mentioned most by those technicians.We also realize there are other items (including power tools) you might like to add to this toolkit. For this reason, you can pick any item to add at the time of purchase and deduct 10% from the cost.

 

However, no substitutions of the tools included in this kit are allowed.

 

Kit Contents

  • 1 • HP2331 • Three-Drawer Toolbox
  • 1 • CT749 • Window and Door Clip Remover
  • 1 • GBM446 • PryBabyTool Set
  • 1 • HTS923 • Hook & Pick Set
  • 2 • IS742 • Standard Windshield Stick
  • 2 • ISC741 • Windshield Stick Chisel End
  • 1 • IWH692 • Windshield Stick With Handle
  • 1 • LS758 • Locking Strip Tool
  • 1 • MB743 • Equalizer® Mirror Bracket Wrench (Torx®)
  • 1 • MBR600 • Equalizer® Mirror Torx® Wrench
  • 1 • MR747 • Moulding Release Tool
  • 1 • PT697 • Weatherstrip Closing Tool
  • 1 • RT753 • Hook Tool
  • 1 • SC170 • Wide Pinchweld Preparation Tool
  • 1 • TPE657 • Cowling Clip Removal Tool
  • 1 • VTP586 • Paint Protector
  • 1 • BNQ271 • Cold Knife
  • 1 • CC50 • 26 to 1 Thrust Ratio Caulking Gun
  • 1 • FCS293 • Equalizer® Quick Knife
  • 1 • TRL350 • Door Panel Clip Removal Tool
  • 1 • UTO539 • Urethane Tube Opener
  • 1 • ALK230 • Adjustable Length Cutting Knife
  • 1 • HM374 • Digital Hygrometer/Thermometer
  • 1 • HRT367 • Hose Removal Pliers
  • 1 • WPL833 • 3/4” W x 6-1/2” L, Pinchweld Prep Tool
  • 1 • JFT323 • Equalizer® LongHorn Seat Release
  • 1 • WFA450 • Universal Wiper Puller
  • 1 • VZB10 • Z Blades Variety Pack (Pkg of 9)
  • 1 • SSC209 • Equalizer® Super Size Vacuum Cups (Set of 2)
  • 1 • TW1442 • Equalizer® HEADLIGHTS Safety Glasses

Master Technician Tool Kit Upgrade

IP MTK659

$935.00

As you gain experience as an auto glass technician you’ll want to add on to the basic set of tools you already have and also add some specialty items to your toolbox. We developed this kit by asking some of the most respected technicians in the country to give their feedback on what should be included in a master technician kit. There were many variations, but the tools that are included in this kit are the ones mentioned most by those technicians.

*This item is oversized and will have extra shipping charges.

Kit Contents

 

1 • 98027 • Metric Folding Hex Wrenches
1 • 98057 • Torx® Folding Wrenches
1 • 98091 • Inch Folding Hex Wrenches
1 • CT749 • Door Handle Clip Tool
1 • EA665 • Equalizer® Apron
1 • EPS761 • 12" Phillips Screwdriver
1 • ESS766 • 29-Piece Screwdriver Set
1 • FL203 • Flexlight
1 • HGS353 • Equalizer® Heatwave™ Heat Gun
1 • JEB569 • Pinchweld Cleaner
1 • LB779 • The Pumper™
1 • LS758 • Windshield Locking Strip Tool
1 • MB744 • Mirror Bracket Wrench
1 • MBR600 • Mirror Torx® Wrench
1 • NCT308 • Nozzle Cutter
1 • BFC81 • Blades for the cutter (Pkg of 5)
1 • PHT318 • Moulding Hold Down Tool
1 • PTK324 • Combo Socket Set
1 • RB497 • Razor Blades (sleeve of 100)
1 • RGC751 • Rubber Gasket Cleaner
1 • RMI309 • Rearview Mirror Installer
1 • RT752 • Rope Insert Tool
1 • RT753 • Rubber Hook Tool
1 • SB531 • Equalizer® Prep Tool
1 • SC300 • Super Scraper™    
1 • SC301 • Super Scraper™ blades
1 • TCR370 • Toyota/Honda Clip Remover
1 • UKB498 • Utility Knife Blades (Pkg of 100)
1 • VNT306 • Top Notch™ Tool
1 • FTF399 • Ford Pickup Clip Remover
1 • PDT443 • PryDaddy™ Tool Set
1 • MCA265 • Moulding Maker
1 • JVT193 • Visual Vacuum Cups (Set of 2)
1 • LRR243 • Lexus Rearview Mirror Tool
1 • JMR357 • Rearview Mirror Tool

MultiSpanner™

IP DZ623

$48.00

MultiSpanner™ has five different sizes that fit 95% of all window retaining nuts (spanner nuts) in the market.

Our MultiSpanner™ is made of a sturdy steel block and has five different sizes and configurations of pins. The MultiSpanner™ is designed to use a 1/4" socket wrench and extension.

 

To use, find the side of the block that pins fit, put the socket on the opposite side, then turn the socket wrench to take off the nut.

Adjustable Retaining Nut Removal Tool

IP ASW576

$48.00

Also refered to as a spanner wrench, most retaining nuts can be removed with this tool. Due to its unique design, it can adjusted to fit a wide variety of retaining nuts. Its wide range of adjustments allows for  removal of some three and four-hole foreign designed retaining nuts.

Made of hardened steel, this quality tool can last a lifetime.

Made in the USA.

Window Retaining Nut Removal Tool

IP LSW583

$8.00

This size window retaining nut is used on Ford, GM, and Chrysler cars. Removing these nuts can be almost impossible without the proper tool, but with the proper tool, it is easy. The slide-through handle allows you to work in confined spaces when you must remove a glass that is not broken. Made of steel and “gold” plated to prevent rust.

Made in the USA.

Pin Removal Pliers

IP PRT305

$74.00

Remove and replace “Swing Out” friction pins. Here is a problem that every auto glass technician has faced: how do you remove the friction pin from “swing out” windows without breaking the latch? The answer is Equalizer’s pin removal pliers. The jaws have five adjustable settings that will fit any swing out window. To remove the friction pin, open the jaws wide enough for the plier push pin to engage the friction pin. When reinstalling the retainer pin, swing the plier's push pin around until it is upside down and use the depression in the plier push pin to hold the friction pin in place. Start the friction pin and then use the plier pusher pin to push the friction pin into the latch.

Made in the USA.

Rivet Setting Tool

IP ERT470

$85.00

This pop rivet setting tool comes with five common size end caps. The nosepiece is 5-1/2" long for reaching deep inside any door. A small plastic bottle between the handles catches shanks from the pop rivet, keeping your client's car clean and preventing accidental tire damage.

Included is an extra pair of jaws and wrench.

Twistable Head Rivet Tool

IP DO1097

$40.00

Twistable Head Rivet Tool features a unique twistable head that rotates 360° to point in any direction.

Manufacturers put rivets in places that are almost inaccessible. Our twistable 360° rivet tool will help install these problem rivets regardless of the direction the head is pointing. It features all-steel construction, a comfortable vinyl grip, and an extended nose to get into hard-to-reach places.

It comes with 4 different size nose pieces for use with different size rivets including a 3/32", 1/8", 5/32", and 3/16” size. The handle locks together for easy storage.

1/4" x 9/64" Grip Range Rivets

IP HR822

$30.00

Short rivets for installing regulators and door handles.

Blind rivets commonly referred to as "pop" rivets are tubular and are supplied with a mandrel through the center. The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and then the mandrel snaps off.

(Box of 100)

1/4" x 5/8" Grip Range Rivets

IP HR823

$40.00

Long rivets for installing door windows into regulators.

Blind rivets commonly referred to as "pop" rivets are tubular and are supplied with a mandrel through the center. The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and then the mandrel snaps off.

(Box of 100)

Equalizer® Installation Sticks

IP IS742

$1.00

The installation stick has been one of the best forms of advertising for over 30 years. No one ever throws one of these things away, even if it gets worn out. In the past, installation sticks were given away as promotional items by most glass and urethane suppliers. As rubber gaskets started disappearing, companies stopped giving them away. Technicians never stopped using them, they found dozens of other uses for them and continue to use them daily.

Chisel Point Installation Stick

IP ISC741

$2.00

Installation sticks with a chisel point are more versatile than regular installation sticks. Use the regular end for all the things you now use a regular installation stick for, and then turn it around and use the chisel end to scrape excess urethane buildup out of corners where a pinchweld scraper or razor knife will damage the paint. They are great for removing excess wet urethane that has squeezed out onto the glass or paint from underneath the molding, and for removing the sealer that squeezes out of the rubber from around a rubber installation.

Custom Installation Sticks • 1000

IP JD1221

$1089.00

Promote your business in glorious full color with your own installation sticks!

You may never give away a business card again. With our custom printed installation sticks, you can have your business information and even your picture printed in glorious full color on installation sticks to give to your customers. 

Is there a catch? No, you just pay a one-time set-up fee of $20.00. Pay it once and you will never need to pay it again unless you change something on your artwork. We can use your existing artwork or we can custom make your artwork for you. Each stick has your custom label on one side only. Include your company logo, pictures, &/or business information on one of the most versatile tools an Auto Glass Technician can own! What better way to promote your business with a few well-placed sticks to help remind your customer who to call when they need a piece of glass or one installed or repaired!
 
Installation Sticks can be used to manipulate urethane, remove door panels, installing rubber gaskets, and tuck in headliners. Heck, they are even useful to open envelopes, scratch your back, and open soda cans.

Notice
Custom orders will not be printed or shipped until artwork has been approved. You will be contacted about artwork once your order has been placed.

Custom Chisel Point Installation Sticks • 1000

IP JC750

$1809.00

Promote your business with your own installation sticks!


You may never give away a business card again. With our custom printed installation sticks, you can have your business information and even your picture printed in glorious full color on installation sticks to give to your customers. What better way to impress your customers. A few well-placed sticks will remind them who to call when they need a piece of glass. Is there a catch? No, you just pay a one-time set-up fee of $20.00. Pay it once and you will never need to pay it again unless you change something on your artwork. We can use your existing artwork or we can custom make your artwork for you. Each stick has your custom label on one side only.

Notice
Custom orders will not be printed or shipped until artwork has been approved. You will be contacted about artwork once your order has been placed.