Accessories

sort by:
view:

Heavy-Duty Windshield Stand

IP HDK629

$60.00

This windshield stand features medium-density foam that supports glass by providing grip and cushing so it does not move. It is 28" wide and adjust in height from 30" to 39" depending on your needs. This stand can support up to 200 lbs.

The stand assembles quickly with just 6 bolts to install and is made of 1" tubing.

*This item is oversized and will have extra shipping

Stand-Aid™

IP STA668

$32.00

Do you have a cracked, pitted, or torn windshield stand cover? The uneven surface can make it difficult to do your work or end up being a costly situation if the glass were to fall and break. A quick and easy fix is the Equalizer® Stand-Aid. No need to remove the old covers, just wrap and secure Stand-Aid with the Velcro® tab over the existing ones and you are good to go! You can also remove and reuse elsewhere in a snap. Made of a 5 mm neoprene fabric with sharkskin and a two inch wide industrial Velcro® strip with a durable stitch.

 

Measures 9” W x 19-1/4” L.

 

Includes One Stand-Aid™ only.

 

Invented By: Jarrett Lafferty


Work Stand Wheeler

IP WSW208

$48.00

This innovative product assists technicians in moving loaded work stands. The Work Stand Wheeler fits both square or round X-Frame type tube stands and supports up to 500 lbs. of components. The entire unit measures 36” long with a low 3” profile for easy storage and is easily transportable for mobile technicians. It’s small enough to be out of your way during use and easy to store when done.

Does not include Windshield Stand!

To order a Windshield Stand for your Work Stand Wheeler reference Part# HDK629 or HDS661.

Windshield Stands Replacement Pad

IP I0664

$9.00

To install the new pads, unbolt the stand, remove the piping tip, and slide the new pad in place. They will also fit stands produced by other manufacturers.

 

Sold individually.  

Burco® Redi Rack™ - 5 Slot

IP BS1047

$500.00

Burco® has established a solid reputation as a innovative manufacturer of high-quality indshield racks.

Burco® Redi Racks™ are constructed of heavy-gauge steel with a highly durable and low maintenance, powder-coat finish for all-weather protection. Redi Rack™ carriers secure windshields in place with Burco®’s exclusive and proprietary finger-lock design to prevent damage in transit. This rack holds five windshileds and is equipt with 15" masts.

This item is oversized and will have extra shipping charges.

Made in the USA

Burco® Redi Rack™ - 9 Slot

IP BT1048

$599.00

Burco® has established a solid reputation as a innovative manufacturer of high-quality indshield racks.

Burco® Redi Racks™ are constructed of heavy-gauge steel with a highly durable and low maintenance, powder-coat finish for all-weather protection. Redi Rack™ carriers secure windshields in place with Burco®’s exclusive and proprietary finger-lock design to prevent damage in transit. This rack holds 9 windshileds and is equipt with 18" masts.

This item is oversized and will have extra shipping charges.

Made in the USA

 

Burco® Redi Rack™ - 9 Solt

IP BV1050

$762.00

New design with 3-tiered square mast channels provide superior stability. Updated removable inset square masts increase loading and unloading efficiency!

Burco® has established a solid reputation as a manufacturer of high-quality indshield racks. They have also established a reputation for innovation. Burco® Redi Racks™ are constructed of heavy-gauge steel with a highly durable safety orange powder-coat finish for all-weather protection and low maintenance. Redi Rack™ carriers secure windshields in place with Burco®’s exclusive and proprietary finger-lock design to prevent damage in transit.

Slick Eddie™

IP BW1052

$16.00

Slick Eddie™ comes free with every Burco® windshield rack.

Burco® has established a solid reputation as a manufacturer of high-quality windshield racks. They have also established a reputation for innovation.

Burco® Redi Racks™ are constructed of heavy-gauge steel with a highly durable black, powder-coat finish for all-weather protection and low maintenance. Redi Rack™ carriers secure windshields in place with Burco®’s exclusive and proprietary finger-lock design to prevent damage in transit.

Made in the USA.

Lo-Rider™ - 9-Slot Folding Glass Rack

IP NSE826

$811.00

How often do you need to carry something in your truck or van, but can’t because your glass rack is in the way? Equalizer® has solved the problem with folding glass racks. Four friction pins hold the mast assembly in a vertical position. When you want to fold the mast, pull out the four friction pins, and then lay the masts down.

The racks come pre-assembled; just bolt the rack to the vehicle and you are ready to go. Constructed of heavy-duty aluminum so there is no paint to chip or metal to rust. Wide mast spacing allows you to carry any size glass panel. Easy loading of glass from top or side allows you to work out of trucks or vans. The NSE826 measures 32" L x 30" W x 21" H.

Made in the USA.

*This item is oversized and will have extra shipping charges.

 

Lo-Rider™ 5-Slot Folding Glass Rack

IP NSE825

$545.00

How often do you need to carry something in your truck or van, but can’t because your glass rack is in the way? Equalizer® has solved the problem with folding glass racks. Four friction pins hold the mast assembly in a vertical position. When you want to fold the mast, pull out the four friction pins, and then lay the masts down. It takes about thirty seconds! 

The racks come pre-assembled; just bolt the rack to the vehicle and you are ready to go. Constructed of heavy-duty aluminum so there is no paint to chip or metal to rust. Wide mast spacing allows you to carry any side glass panel. Easy loading of glass from top or side allows you to work out of trucks or vans.

The NSE825 measures 20-1/2" L x 30" W x 21"H.

Made in the USA.

*This item is oversized and will have extra shipping charges.

Foam Dash Insulation • 15/16”

IP FDI897

$23.00

The foam strip on the inside of the vehicle between the glass and dashboard is often damaged by windshield removal. These compressed foams can be used to replace the damaged strips helping to reduce noise and create a factory finish. Besides these OE applications, there are thousands of more applications which also have a foam barrier.

Each roll is 5' long (1.5 M) and available in three different widths.

Foam Dash Insulation • 3/4” wide

IP FDI896

$19.00

The foam strip on the inside of the vehicle between the glass and dashboard is often damaged by windshield removal. These compressed foams can be used to replace the damaged strips helping to reduce noise and create a factory finish. Besides these OE applications, there are thousands of more applications which also have a foam barrier.

Each roll is 5' long (1.5 M) and available in three different widths.

Foam Dash Insulation • 9/16”

IP FDI898

$15.00

The foam strip on the inside of the vehicle between the glass and dashboard is often damaged by windshield removal. These compressed foams can be used to replace the damaged strips helping to reduce noise and create a factory finish. Besides these OE applications, there are thousands of more applications which also have a foam barrier.

Each roll is 5' long (1.5 M) and available in three different widths.

Neoprene Foam Instalation Tape • 3/16" x 3/16" x 18' • 12 pack

IP OSA6493

$56.00

Commonly called foam dams.

On many vehicles you can see the urethane from the inside of the vehicle and this is why manufacturers use a foam dam. Foam dams do two critical things, first they prevent the urethane from squeezing into the vehicle, but secondly and perhaps as equally important is they give a smooth nice looking finish to the inside of a vehicle. While this appearance may not be important to the construction worker driving a work truck, it is very important to a person driving a nice new vehicle. For this reason you should always have a nice selection of these foam dams with you. It is a small price to pay when you consider the alternative of removing a windshield to clean up a messy urethane job.

Adhesive on one side.

Neoprene Foam Installation Tape • 1/4" x 1/4" x 18' • 12 pack

IP OSA6494

$73.00

Commonly called foam dams.

On many vehicles you can see the urethane from the inside of the vehicle and this is why manufacturers use a foam dam. Foam dams do two critical things, first they prevent the urethane from squeezing into the vehicle, but secondly and perhaps as equally important is they give a smooth nice looking finish to the inside of a vehicle. While this appearance may not be important to the construction worker driving a work truck, it is very important to a person driving a nice new vehicle. For this reason you should always have a nice selection of these foam dams with you. It is a small price to pay when you consider the alternative of removing a windshield to clean up a messy urethane job.

Adhesive on one side.